Now showing items 541-560 of 43216

    • MIL-DTL-83734/21 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2000
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-83734. ...
    • MIL-DTL-55302/56H (2) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • NATO STANAG 3469 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2010
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to establish common characteristics for parachute extraction assemblies and aircraft extraction parachute ejector installation.
    • MS75093 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-L-3661/51B VALID NOTICE 2 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2006
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code
    • MIL-DTL-11589/549A VALID NOTICE 1 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2013
      Organization : ARMY - IH - Institute of Heraldry
    • MIL-PRF-85045/13C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1999
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF- ...
    • MIL-DTL-10176K 

      Type: standard
      Source: DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply:;2005
      Organization : DLA - CT - DLA Troop Support - Clothing & Textile Items of Supply
      Abstract: This specification covers wool, polyester and wool gabardine cloths. Intended Use: The cloth is intended for use in the manufacture of dress clothing and uniforms for personnel of the Department of Defense.
      Subject(s) : Clothing , Dress Uniforms , Mothproofing ,
    • MSFC-SPEC-50M23146 

      Type: standard
      Source: MSFC - NASA - MSFC - Marshall Space Flight Center:;1973
      Organization : MSFC - NASA - MSFC - Marshall Space Flight Center
    • A-A-52404 VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • SMD-5962-96577 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device class Q) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected ...
    • SMD-5962-91565 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • MIL-M-81957B 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1990
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification establishes engineering and design criteria for the development and construction of NAVAIR Mobile Facility (MF) Units. These MF's or units are class 1 nonexpandable tactical shelters used for testing ...
      Subject(s) : Field , Test , Aircraft Engines , Instrumentation , Jet Engine , Test , Jet Engines , Field , Test , Van , Test , Van , Jet Engines ,
    • MIL-PRF-19500/645C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the performance requirements for silicon, dual ultrafast, power rectifier diodes in a center-tap configuration. Four levels of product assurance are provided for oath device type as specified in ...
    • MIL-A-10593A 

      Type: standard
      Source: ARMY - CR - US Army Communications Electronics Command:;1953
      Organization : ARMY - CR - US Army Communications Electronics Command
      Abstract: This specification covers one type of air sampling equipment designated as Air Sampler MX-1191 ( )/TDQ-1. Intended Use: Air Sampler MX-11919( )/TDQ-1 consists of a storage battery operated blower with a ...
    • MIL-L-3661/55B VALID NOTICE 1 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;1987
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code
    • MIL-PRF-83446/37A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • MS20003 REV C VALID NOTICE 3 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;2003
      Organization : NAVY - AS - Naval Air Systems Command
    • COMDTINST M5300.3 

      Type: standard
      Source: USCG - United States Coast Guard:;2013
      Organization : USCG - United States Coast Guard
      Abstract: PURPOSE. This Manual establishes policy and doctrine, and outlines specific practices and procedures for the Coast Guard's Officer Specialty Management System (OSMS).
    • NATO STANAG 2953 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2008
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to register national acceptance of AOP-2 (C).