Defence Standards: Recent submissions

Now showing items 581-600 of 43216

    • TT-B-1325D 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2007
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers three types of retro-reflective beads used to reflectorize traffic and airfield marking paints. Intended Use: Type I, Gradation A, coarse - low-index recycled glass beads for drop-on ...

    • NASA-HDBK-8739.23 W/CHG 1 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2011
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: This Handbook will provide an overview of complex electronics, the design process, and assurance activities. It discusses:
      • Which devices are "complex electronics," and which are not.
      • What each ...

    • MIL-C-39024/5C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1991
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      [C circled] The requirements for acquiring the product described herein shall consist of this specification ...

    • DODD 4150.07-M VOL 2 

      Type: standard
      Source: DODD - DoD Directives Service:;2013
      Organization : DODD - DoD Directives Service
      Abstract: PURPOSE
      a. Manual. This manual is composed of several volumes, each containing its own purpose, and reissues DoD 4150.7-M (Reference (a)). The purpose of the overall manual, in accordance with the authority in ...

    • MIL-DTL-11589/322B 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1995
      Organization : ARMY - IH - Institute of Heraldry
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • NASA-LLIS-0449 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1990
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      APU 2 Fuel Pump Heater was cycling high during flight. Detailed analysis of the thermal switch showed extreme wear from the switch bi-metal disc and case. Large amounts ...
      Subject(s) : Hardware , Parts Materials & Processes , Test & Verification ,

    • DODD 3020.43 

      Type: standard
      Source: DODD - DoD Directives Service:;2007
      Organization : DODD - DoD Directives Service
      Abstract: SUMMARY:
      • This is a controlled document.
      • This website is not authorized to post controlled documents.
      • DoD Access: (DoD PKI certificate required)

    • NASA-LLIS-0241 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1993
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      A 125 pound per square inch pressure air line in a ground trench, used to supply test facilities, failed by splitting along the longitudinal weld. The 10 inch diameter ...
      Subject(s) : Pressure Vessels ,

    • NATO STANAG 1040 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2013
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this NATO standardization agreement (STANAG) is to respond to the following interoperability requirement.

    • NASA-TN-D-7429 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1973
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: An experimental study of surface pressure distributions on a family of blunt and sharp large angle cones was made in hypersonic flows of helium, air, and tetrafluoro-methane. The effective isentropic exponents of these ...
      Subject(s) : AERODYNAMIC , BLUNT , BODIES , CHARACTERISTICS , COEFFICIENTS , CONICAL , DISTRIBUTION , DRAG , FLOW , GASES , HYPERSONIC , PRESSURE , REAL ,

    • NATO STANAG 4357 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1991
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Scope:
      THE AIM OF THIS AGREEMENT IS TO REGISTER NATIONAL ACCEPTANCE OF ALLIED VEHICLE TESTING PUBLICATIONS (AVTPS).

    • MIL-PRF-83446/25A VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime

    • MIL-L-3661/6C VALID NOTICE 1 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2001
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code

    • MIL-DTL-39030/8A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2003
      Organization : DLA - CC - DLA Land and Maritime

    • DI-IPSC-81440A VALID NOTICE 1 

      Type: standard
      Source: NAVY - EC - Space and Naval Warfare Systems Command:;2013
      Organization : NAVY - EC - Space and Naval Warfare Systems Command

    • A-A-50207A VALID NOTICE 2 

      Type: standard
      Source: DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2001
      Organization : DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code

    • NASA-LLIS-1265 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2002
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: Description of Driving Event:
      While testing at Mach 0.8 in the 16-ft Transonic Tunnel, a full-scale F-15 inlet model separated from the sting. The model traveled downstream and impacted the catch screen ...
      Subject(s) : Test Facility ,

    • MIL-STD-25B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1984
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This standard applies to ship structural drawings for steel and aluminum ships and supplements MIL-STD-12 and DOD-STD-100. Where a conflict exists between these documents, this standard shall have precedence.
      Two ...

    • MIL-M-38510/102C VALID NOTICE 2 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime

    • MIL-PRF-39016/44E VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime