IEEE 535 INT 1

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations

Organization:

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Year: 2009

Abstract: Scope:

Foreword

(This Foreword is not a part of ANSI/IEEE Std 535-1986, IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations.)
ANSI/IEEE Std 323-1983, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class lE and interface systems. This standard, ANSI/IEEE Std 535-1986, was developed to provide specific methods and type test procedures for lead storage batteries in adherence to ANSI/IEEE Std 323-1983.
Adherence to this standard may not suffice for assuring public health and safety because it is the integrated performance of the electrical systems of the station that limits the consequence of accidents. Each applicant has the responsibility to assure himself and others that this document, if used, is pertinent to his application and that the integrated performance of his station is adequate.
This standard was prepared by the Working Group on Batteries of the Station Design Subcommittee of the Power Generation Committee. At the time this document was approved, the working group had the following members:
J. H. Bellack, Chair
J. W. Anderson
D. Brandt
J. L. Chamberlin
V. E. Dalke
E. Daniels
P. J. Demar
D. O. Feder
J. Gourdier
R. S. Green
R. W. Hopewell
R. Kelleher
P. Kine*
J. Knox
D. S. Levin
S. Meissel
J. F. Montalbano
B. Radimer
H. K Reid
T. Ruhlman
B. G. Treece
G. Tsouderos
G. Walker
*Liaison representative, SC-2 of NPEC
The following persons were on the balloting committee that approved this document for submission to the IEEE Standards Board:
W. W. Avril
M. S. Baldwin
J. H. Bellack
I. B. Berezowsky
G. Berman
F. L. Brennan
P. G. Brown
R. W. Cantrell
H. E. Church
R. S. Coleman
R. E. Cotta
M. L. Crenshaw
P. M. Davidson
G. R. Engmann
W. M. Fenner
A. H. Ferber
D. I. Gorden
R. D. Handel
F. W. Keay
P. R. Landrieu
G. L. Luri
J. T. Madill
O. S. Mazzoni
M. W. Migliaro
J. T. Nikolas
R. E. Penn
J. D. Plaxco
R. J. Reiman
B. E. Roberts
A. J. Spurgin
G. I. Stillman
J. E. Stoner, Jr
J. B. Sullivan
T. D. Younkins
When the IEEE Standards Board approved this standard on September 19, 1985, it had the following membership:
John E, May, Chair
John P. Riganati, Vice Chair
Sava I. Sherr, Secretary
James H. Beal
Fletcher J. Buckley
Rene Castenschiold
Edward Chelotti
Edward J. Cohen
Paul G. Cummings
Donald C. Fleckenstein
Jay Forster
Daniel L. Goldberg
Kenneth D. Hendrix
Irvin N. Howell
Jack Kinn
Joseph L. Koepfinger*
Irving Kolodny
R. F. Lawrence
Lawrence V. McCall
Donald T.Michael*
Frank L. Rose
Clifford O. Swanson
J. Richard Weger
W. B. Wilkens
Charles J. Wylie
Scope
This document describes qualification methods for Class lE lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 [2] can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983 [3]. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard.

URI: https://yse.yabesh.ir/std/handle/yse/101227

Collections :

IEEE - The Institute of Electrical and Electronics Engineers, Inc.

Show full item record

contributor author	IEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned	2017-09-04T16:37:44Z
date available	2017-09-04T16:37:44Z
date copyright	01/01/2009
date issued	2009
identifier other	VGGFLCAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/101227
description abstract	Scope: Foreword (This Foreword is not a part of ANSI/IEEE Std 535-1986, IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations.) ANSI/IEEE Std 323-1983, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class lE and interface systems. This standard, ANSI/IEEE Std 535-1986, was developed to provide specific methods and type test procedures for lead storage batteries in adherence to ANSI/IEEE Std 323-1983. Adherence to this standard may not suffice for assuring public health and safety because it is the integrated performance of the electrical systems of the station that limits the consequence of accidents. Each applicant has the responsibility to assure himself and others that this document, if used, is pertinent to his application and that the integrated performance of his station is adequate. This standard was prepared by the Working Group on Batteries of the Station Design Subcommittee of the Power Generation Committee. At the time this document was approved, the working group had the following members: J. H. Bellack, Chair J. W. Anderson D. Brandt J. L. Chamberlin V. E. Dalke E. Daniels P. J. Demar D. O. Feder J. Gourdier R. S. Green R. W. Hopewell R. Kelleher P. Kine* J. Knox D. S. Levin S. Meissel J. F. Montalbano B. Radimer H. K Reid T. Ruhlman B. G. Treece G. Tsouderos G. Walker Liaison representative, SC-2 of NPEC The following persons were on the balloting committee that approved this document for submission to the IEEE Standards Board: W. W. Avril M. S. Baldwin J. H. Bellack I. B. Berezowsky G. Berman F. L. Brennan P. G. Brown R. W. Cantrell H. E. Church R. S. Coleman R. E. Cotta M. L. Crenshaw P. M. Davidson G. R. Engmann W. M. Fenner A. H. Ferber D. I. Gorden R. D. Handel F. W. Keay P. R. Landrieu G. L. Luri J. T. Madill O. S. Mazzoni M. W. Migliaro J. T. Nikolas R. E. Penn J. D. Plaxco R. J. Reiman B. E. Roberts A. J. Spurgin G. I. Stillman J. E. Stoner, Jr J. B. Sullivan T. D. Younkins When the IEEE Standards Board approved this standard on September 19, 1985, it had the following membership: John E, May, Chair* John P. Riganati, Vice Chair Sava I. Sherr, Secretary James H. Beal Fletcher J. Buckley Rene Castenschiold Edward Chelotti Edward J. Cohen Paul G. Cummings Donald C. Fleckenstein Jay Forster Daniel L. Goldberg Kenneth D. Hendrix Irvin N. Howell Jack Kinn Joseph L. Koepfinger* Irving Kolodny R. F. Lawrence Lawrence V. McCall Donald T.Michael* Frank L. Rose Clifford O. Swanson J. Richard Weger W. B. Wilkens Charles J. Wylie Scope This document describes qualification methods for Class lE lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 [2] can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983 [3]. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard.
language	English
title	IEEE 535 INT 1	num
title	Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations	en
type	standard
page	4
status	Revised
tree	IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
contenttype	fulltext