درباره ما
HH-P-151F
PACKING; RUBBER-SHEET, CLOTH-INSERT
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1985
Abstract: Cloth-insert, rubber-sheet packing covered by this specification is intended for flange joints for water or brine services up to 250 pounds pressure and for ventilating systems.
Packing covered by this specification shall be of the following classes as specified (see 6.2.1):
Packing covered by this specification shall be of the thickness specified (see 6.2.1).
Intended Use: Packing covered by this specification is intended for use as follows: Class 1 - When the class of rubber and resistance to oil are not important, the maximum use temperature is a nominal 200°F. Class 2 - When medium resistance to swelling in petroleum base hydrocarbons is desired, the maximum use temperature is a nominal 200°F. Class 3 - When synthetic rubber is desired and resistance to swelling in petroleum base hydrocarbons is not essential, the maximum use temperature is a nominal 200°F. Class 4 - When high resistance to swelling in petroleum base hydro carbons is desired, the maximum use temperature is a nominal 250 °F.
Packing covered by this specification shall be of the following classes as specified (see 6.2.1):
Class 1 - Commercial. Class 2 - Polychloroprene rubber. Class 3 - Styrene-butadiene rubber. Class 4 - Acrylonitrile-butadiene rubber.
Packing covered by this specification shall be of the thickness specified (see 6.2.1).
Intended Use: Packing covered by this specification is intended for use as follows: Class 1 - When the class of rubber and resistance to oil are not important, the maximum use temperature is a nominal 200°F. Class 2 - When medium resistance to swelling in petroleum base hydrocarbons is desired, the maximum use temperature is a nominal 200°F. Class 3 - When synthetic rubber is desired and resistance to swelling in petroleum base hydrocarbons is not essential, the maximum use temperature is a nominal 200°F. Class 4 - When high resistance to swelling in petroleum base hydro carbons is desired, the maximum use temperature is a nominal 250 °F.
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:37:51Z | |
| date available | 2017-09-04T16:37:51Z | |
| date copyright | 07/19/1985 | |
| date issued | 1985 | |
| identifier other | VGPTDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/101367 | |
| description abstract | Cloth-insert, rubber-sheet packing covered by this specification is intended for flange joints for water or brine services up to 250 pounds pressure and for ventilating systems. Packing covered by this specification shall be of the following classes as specified (see 6.2.1): Class 1 - Commercial. Class 2 - Polychloroprene rubber. Class 3 - Styrene-butadiene rubber. Class 4 - Acrylonitrile-butadiene rubber. Packing covered by this specification shall be of the thickness specified (see 6.2.1). Intended Use: Packing covered by this specification is intended for use as follows: Class 1 - When the class of rubber and resistance to oil are not important, the maximum use temperature is a nominal 200°F. Class 2 - When medium resistance to swelling in petroleum base hydrocarbons is desired, the maximum use temperature is a nominal 200°F. Class 3 - When synthetic rubber is desired and resistance to swelling in petroleum base hydrocarbons is not essential, the maximum use temperature is a nominal 200°F. Class 4 - When high resistance to swelling in petroleum base hydro carbons is desired, the maximum use temperature is a nominal 250 °F. | |
| language | English | |
| title | HH-P-151F | num |
| title | PACKING; RUBBER-SHEET, CLOTH-INSERT | en |
| type | standard | |
| page | 15 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985 | |
| contenttype | fulltext |