MIL-L-24478C

LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T16:38:09Z
date available	2017-09-04T16:38:09Z
date copyright	33219
date issued	1990
identifier other	VHNVDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/101710
description abstract	This specification covers requirements for a lubricant consisting of molybdenum disulfide and isopropanol, intended for use with metal parts having limited clearances and in applications where control of impurities is required. Intended Use: This lubricant is intended for use on threaded fasteners and other antiseize applications of closely fitted parts. Molybdenum disulfide shall not be applied on 300 series or type 17-4 stainless steel component surfaces. Areas to be welded must be protected from contamination with this lubricant. The following precautions shall be taken: (a) Where practical, application and burnishing of lubricant shall be accomplished in areas away from where welding is being performed. (b) Where necessary, protect weld preparation areas by masking. Lubricant material to this revision of MIL-L-24478 is interchangeable with material to previous revisions.
language	English
title	MIL-L-24478C	num
title	LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL	en
type	standard
page	11
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
contenttype	fulltext