درباره ما
MIL-L-24478C
LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1990
Abstract: This specification covers requirements for a lubricant consisting of molybdenum disulfide and isopropanol, intended for use with metal parts having limited clearances and in applications where control of impurities is required. Intended Use: This lubricant is intended for use on threaded fasteners and other antiseize applications of closely fitted parts. Molybdenum disulfide shall not be applied on 300 series or type 17-4 stainless steel component surfaces. Areas to be welded must be protected from contamination with this lubricant. The following precautions shall be taken: (a) Where practical, application and burnishing of lubricant shall be accomplished in areas away from where welding is being performed. (b) Where necessary, protect weld preparation areas by masking. Lubricant material to this revision of MIL-L-24478 is interchangeable with material to previous revisions.
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:38:09Z | |
| date available | 2017-09-04T16:38:09Z | |
| date copyright | 33219 | |
| date issued | 1990 | |
| identifier other | VHNVDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/101710 | |
| description abstract | This specification covers requirements for a lubricant consisting of molybdenum disulfide and isopropanol, intended for use with metal parts having limited clearances and in applications where control of impurities is required. Intended Use: This lubricant is intended for use on threaded fasteners and other antiseize applications of closely fitted parts. Molybdenum disulfide shall not be applied on 300 series or type 17-4 stainless steel component surfaces. Areas to be welded must be protected from contamination with this lubricant. The following precautions shall be taken: (a) Where practical, application and burnishing of lubricant shall be accomplished in areas away from where welding is being performed. (b) Where necessary, protect weld preparation areas by masking. Lubricant material to this revision of MIL-L-24478 is interchangeable with material to previous revisions. | |
| language | English | |
| title | MIL-L-24478C | num |
| title | LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL | en |
| type | standard | |
| page | 11 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990 | |
| contenttype | fulltext |