درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1041-1060 of 1822
-
API RP 14H
Abstract: One of the means of assuring positive wellstrean shutoff is the use of the wellhead surface safety valve (SSV) or underwater safety valve (USV). It is imperative that the SSV/USV be mechanically reliable. It should therefore ... -
API PUBL 4616
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 17H
Abstract: This document provides recommendations for development and design of remotely operated subsea tools and interfaces on subsea production systems in order to maximize the potential of standardizing equipment and design ... -
API STD 612
Abstract: This standard specifies the minimum requirements for steam turbines for special-purpose applications for use in the petroleum, petrochemical, and natural gas industries. These requirements include basic design, materials, ... -
API MPMS 17.11
Abstract: This document provides guidance on the use, maintenance and calibration of restricted and closed measurement and sampling equipment. It also provides guidance on preferred size and positioning for gauging and sampling ... -
API STD 780
Abstract: General
This Standard was prepared by a security risk assessment (SRA) committee of API to assist the petroleum and petrochemical industries in understanding conducting SRAs. The standard describes the ... -
API MPMS 9.1
Abstract: This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures ... -
API RP 577 CHINESE
Abstract: This recommended practice provides guidance to the API authorized inspector on welding inspection as encountered with fabrication and repair of refinery and chemical plant equipment and piping. Common welding processes, ... -
API STD 526
Abstract: This standard is a purchase specification for flanged steel pressure-relief valves. Basic requirements are given for direct spring-loaded pressure-relief valves and pilot-operated pressure-relief valves as follows:
— ... -
API MPMS 11.5
Abstract: These intraconversion tables are applicable to all crude oils, petroleum products, and petrochemicals. -
API SPEC 6FB
Abstract: PURPOSE
This specification was formulated to establish procedures for testing and evaluating the pressure-containing performance of API end connections when exposed to fire. Valves, wellhead seals, or ... -
API RP 941
Abstract: This recommended practice (RP) summarizes the results of experimental tests and actual data acquired from operating plants to establish practical operating limits for carbon and low alloy steels in hydrogen service at ... -
API RP 2SK
Abstract: The purpose of this document is to present a rational method for analyzing, designing or evaluating station-keeping systems used for floating units. This method provides a uniform analysis tool which, when combined with ... -
API MPMS 11.3.2.1
Abstract: This standard identifies an equation of state (EOS) suitable for use in custody transfer measurement of pure ethylene (>99 %) in the gaseous, liquid, and super critical phases. Given flowing temperature and pressure, ... -
API E5
Abstract: FOREWORD
This document reflects our industry's continuing commitment to environmental protection. It provides guidance for minimizing the direct and indirect environmental impacts of solid wastes originating ... -
API PETROLEUM PROCESS
Abstract: This document lists the entries for petroleum process streams and related chemical substances which are included in the Toxic Substances Control Act Chemical Substances Inventory (EPA, May, 1979) or in Cumulative Supplement ...