درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1161-1180 of 1822
-
API PUBL 331
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 1165
Abstract: SCOPE LIMITATIONS
This RP was created by an API Cybernetics Subcommittee task force, based on industry practices used on liquid pipeline SCADA systems. Most participants operate crude, product, chemical, ... -
API NATIONAL USED
Abstract: OBJECTIVES: The purpose of this study was to review the status of used engine oil collection in the United States. By conducting the study, the American Petroleum Institute wished to document state efforts to collect oil ... -
API TR 11L
Abstract: Introduction
In 1954, a group of users and manufacturers of sucker rod pumping equipment undertook a study in depth of the many complex problems associated with this means of lifting fluid from a well. ... -
API RP 9B
Abstract: This recommended practice (RP) covers typical wire rope applications for the oil and gas industry.
Typical practices in the application of wire rope to oil field service are indicated in Table 1, which shows the sizes ... -
API MPMS 10.2
Abstract: This test method covers the determination of water in crude oil by distillation.
The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
This ... -
API RP 552
Abstract: This document reviews the recommended practices for the installation of electronic and pneumatic measurement and control-signal transmission systems. It does not discuss leased wire, radio, and telemetering transmission. ... -
API RP 17U
Abstract: This recommended practice (RP) provides guidance for the performance, qualification, application, quality control, handling, and storage requirements of wet and dry thermal insulation for subsea applications in the petroleum ... -
API RP 1167
Abstract: Scope Limitations
This document is not intended to be a step by step set of instructions on how to build an alarm management system. Each pipeline operator has a unique operating philosophy and will ... -
API RP 11ER
Abstract: This RP is intended to provide safeguards for all persons who are required to work around or on oil well pumping units.
a) These safeguards should prevent bodily injury from contact with moving parts by anyone inadvertently ... -
API STD 602 RUSSIAN
Abstract: 1 Scope
1.1 This standard covers flanged-end, threaded-end, socket-welding-end, and butt-welding-end compact steel gate valves, including extended-body type, corresponding to nominal pipe sizes in ASME B36.10M or ... -
API MPMS 2.8B
Abstract: Scope and Field of Application
This recommended practice is intended as a guide for establishing reference gauge heights during calibration of marine tank vessels. In many cases this calibration is ... -
API API/EI MPMS 19.5
Abstract: This standard provides methods for estimating evaporative loss from marine vessel transfer operations. Specifically, this standard addresses:
1) loading stock into:
a) ship or ocean barges, or
b) shallow draft ... -
API RP 10B-4
Abstract: This part of ISO 10426 defines the methods for the generation and testing of foamed cement slurries and their corresponding unfoamed base cement slurries at atmospheric pressure. -
API MPMS 11.2
Abstract: The purpose of this standard is to correct hydrocarbon volumes metered under pressure to the corresponding volumes at the equilibrium pressure for the metered temperature. This standard contains compressibility factors ... -
API RP 2X
Abstract: This recommended practice (RP) for nondestructive examination (NDE) of offshore structural fabrication and guidelines for qualification of personnel contains guidance on NDE methods which have evolved from fabrication ... -
API TR 17TR2
Abstract: In the construction of a flexible pipe, an inner polymeric pressure sheath is the only layer which seals the conveyed fluid within the pipe structure. Therefore, its integrity is crucial to safe and reliable operation. ... -
API JOB CODE PART 2
Abstract: INTRODUCTION
The purpose of this revised job classification system is to provide a standardized method for identifying and classifying jobs within the petroleum refining industry, related ... -
API STD 520 PT II
Abstract: This standard covers methods of installation for pressure-relief devices (PRDs) for equipment that has a maximum allowable working pressure (MAWP) of 15 psig (1.03 barg or 103 kPAg) or greater. Pressure-relief valves (PRVs) ...