درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1341-1360 of 1822
-
API STD 7CW
Abstract: It is the intent of this standard to provide a method by which results will be reproducible, under a specified set of conditions, for conducting tests that determine casing wear due to rotation of drill stem elements. ... -
API PUBL 300
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 13M-4
Abstract: This part of ISO 13503 provides for consistent methodology to measure fluid loss of stimulation and gravel-pack fluid under static conditions. However, the procedure in this part of ISO 13503 excludes fluids that react ... -
API RP 585
Abstract: General
The purpose of this document is to provide owners/users with practices for developing, implementing, sustaining, and enhancing an investigation program for pressure equipment integrity (PEI) ... -
API RP 1161
Abstract: The purpose of this recommended practice is to provide guidance for developing and maintaining a compliant Operator Qualification (OQ) program. Operators may choose to use all, part or none of this document. Additionally, ... -
API RP 49
Abstract: Recommendations set forth in this publication apply to oil and gas well drilling and servicing operations involving hydrogen sulfide. These operations include well drilling, completion, servicing, workover, downhole ... -
API STD 618
Abstract: This standard covers the minimum requirements for reciprocating compressors and their drivers for use in petroleum, chemical, and gas industry services for handling process air or gas with either lubricated or non-lubricated ... -
API RP 1160
Abstract: This recommended practice (RP) is applicable to pipeline systems used to transport "hazardous liquids" as defined in U.S. Title 49 CFR Part 195.2. The use of this RP is not limited to pipelines regulated under 49 CFR 195, ... -
API RP 92U
Abstract: Purpose
The purpose of these recommended practices is to provide information that can serve as a guide for planning, installation, operation and testing of underbalanced drilling equipment systems on ... -
API MPMS 12.2.1 ADD 1
Abstract: Introduction
After considerable time and effort, a revision of API MPMS Ch. 11.1 (Physical Properties Data—Temperature and Pressure Correction Factors for Generalized Crude Oils, ... -
API MPMS 17.4 SPANISH
Abstract: Alcance y Campo de Aplicación
Este estándar solo aplica a cuantificación de volúmenes pequeños por medición manual en buques antes de la carga o después de descargar. ... -
API MPMS 2.2C
Abstract: This part specifies a calibration procedure for application to tanks above 26 ft in diameter with cylindrical courses that are substantially vertical. It provides a method for determining the volumetric quantity contained ... -
API PUBL 4645
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API PUBL 328
Abstract: SCOPE
The scope of this study was limited to physical characterization of the products when exposed to fuels and blends. Issues surrounding the decision of whether or not to use liners for a particular application, ... -
API TR 938-B
Abstract: This report is only applicable to the 9Cr-1Mo-V alloy steel, Grade 91. There are newer, higher strength grades, namely 9Cr-2W (Grade P92) and 9Cr-1Mo-1W-Cb (Grade 911), however, because little fabrication and welding ... -
API STD 620
Abstract: General
The API Downstream Segment has prepared this standard to cover large, field-assembled storage tanks of the type described in 1.2 that contain petroleum intermediates (gases or vapors) and ... -
API MPMS 15
Abstract: Scope and Field of Application
This publication speciÞes the API preferred units for quantities involved in petroleum industry measurements and indicates factors for conversion of quantities ... -
API PUBL 937
Abstract: FOREWORD
American Petroleum Institute (API) provides standards for the design, construction and inspection of storage tanks. One of the family of design standards, API 650--Welded Steel Tanks for Oil Storage--is ... -
API PUBL 4741
Abstract: Purpose:
To define the following activities for collecting and interpreting soil gas samples:
• Collecting information
• Identifying sample locations
• Determining sample collection ... -
API SPEC 7-1
Abstract: This part of ISO 10424 specifies requirements for the following drill stem elements: upper and lower kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and ...