درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1321-1340 of 1822
-
API VT-5
Abstract: FOREWORD
The third edition of this manual was written to update and outline the application of the various wireline tools, equipment, and operations in the oil and gas industry. The manual does not cover all ... -
API RP 1130
Abstract: Scope Limitations
This recommended practice is not all-inclusive. The reader must have an intimate knowledge of the pipeline system and may have to refer to other standards for background or additional ... -
API PUBL 4713
Abstract: OBJECTIVES: The specific objectives of this test were to:
Primary objectives
• Compare PM2.5 mass measured using an in-stack filter and iced impinge train (EPA Method 201A/202) and PM2.5 mass measured ... -
API MPMS 11.4.1
Abstract: This standard is applicable to all API Standards that use the density of water or its volume correction factors. -
API RP 573
Abstract: This recommended practice (RP) covers the inspection practices for fired boilers and process heaters (furnaces) used in petroleum refineries and petrochemical plants. The practices described in this document are focused ... -
API RP 574
Abstract: This recommended practice (RP) supplements API 570 by providing piping inspectors with information that can improve skill and increase basic knowledge and practices. This RP describes inspection practices for piping, tubing, ... -
API MPMS 14.5
Abstract: This standard presents procedures for calculating, at base conditions from composition, the following properties of natural gas mixtures: gross heating value, relative density (real and ideal), compressibility factor and ... -
API STD 600 RUSSIAN
Abstract: This International Standard specifies the requirements for a heavy duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions indicate ... -
API DR 53
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API TR 2571
Abstract: This Technical Report (TR) provides guidance in the following areas to allow the user to achieve a targeted uncertainty of measurement:
— selection of flow meter type; differential pressure (DP), displacement, ... -
API MPMS 17.1
Abstract: These guidelines specify the policy and minimum recommended practices for the manual and automatic measurement, sampling, and accounting for bulk quantities of crude oil (including spiked, blended, and reconstituted crude ... -
API PUBL 342
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 10B-3
Abstract: This part of ISO 10426 provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment. -
API MPMS 7
Abstract: This chapter describes the methods, equipment, and procedures for determining the temperature of petroleum and petroleum products under both static and dynamic conditions. This chapter discusses temperature measurement ... -
API RP 2Z
Abstract: This Recommended Practice covers requirements for Preproduction qualification, by special welding and mechanical testing, of specific steelmaking and processing procedures for the manufacture of steel of a specified chemical ... -
API PUBL 1663C
Abstract: FOREWORD
API publication may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes ... -
API TR 2569
Abstract: INTRODUCTION
This report addresses evaporative loss from internal floating-roof tanks (IFRTs) with closed vents, a subject not currently addressed by API. Nomenclature is provided in Appendix A.
The ... -
API RP 5L7
Abstract: This Recommended Practice provides for UNPRIMED INTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE for use in transportation pipelines in the petroleum industry. The recommendation provided herein covers:
a. Section 1 ...