درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 1381-1400 of 1822
-
API SMART LEAK
Abstract: This report presents technology background and test results on an improved Leak Detection and Control method for application in refineries and petrochemical plants. Smart Leak Detection and Repair (LDAR) focuses on ... -
API MPMS 4.1
Abstract: Section 1 is a general introduction to the subject of proving. The requirements in Chapter 4 are based on customary practices that evolved for crude oils and products covered by API MPMS Ch. 11.1. The prover and ... -
API SPEC 16RCD
Abstract: PURPOSE
This specification is formulated to provide for the availability of safe and functionally interchangeable rotating control devices (RCDs) utilized in air drilling, drilling operations for oil and gas, and in ... -
API RP 2200
Abstract: This recommended practice (RP) discusses guidelines to safe practices while repairing in-service pipelines for crude oil, liquefied petroleum gas, highly volatile liquids and product service. Although it is recognized that ... -
API PUBL 4666
Abstract: SCOPE OF REVIEW
This review focuses on laboratory data regarding the effects of common cations and anions on both freshwater and marine organisms. While a given water can have a variety of constituents, only ... -
API STD 2000
Abstract: This standard covers the normal and emergency vapor venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed for operation ... -
API MPMS 10.9
Abstract: This test method covers the determination of water in the range from 0.02 to 5.00 mass or volume % in crude oils. Mercaptan (RSH) and sulfide (S− or H2S) as sulfur are known to interfere with ... -
API SPEC 11E
Abstract: This specification provides the requirements and guidelines for the design and rating of beam pumping units for use in the petroleum and natural gas industry. Included are all components between the carrier bar and the ... -
API STD 2560
Abstract: This publication provides methodologies for monitoring liquid pipeline loss/gain, and for determining the normal loss/gain level for any given pipeline system. Troubleshooting suggestions are also presented.
This ... -
API RP 554 PART 1
Abstract: This Recommended Practice addresses the processes required to successfully implement Process Control Systems for refinery and petrochemical services. The major topics addressed are:- The basic functions ...
-
API STD 600
Abstract: This International standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would ... -
API RP 68
Abstract: 1 Scope
Recommendations set forth in this publication apply to oil and gas well servicing and workover operations involving hydrogen sulfide. These operations include well completion, servicing, workover, ... -
API RP 11V8
Abstract: Introduction to Gas Lift System Design and Performance Prediction
API RP 11V8 Recommended Practice for Gas Lift System Design and Performance Prediction , provides two functions:
• ... -
API PUBL 307
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD REVIEWED.
API IS NOT UNDERTAKING ...