درباره ما
API STD 600
Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets - Twelfth Edition; Incorporates Errata 1 November 2009
Organization:
API - American Petroleum Institute
Year: 2009
Abstract: This International standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters.
This International standard sets forth the requirements for the following gate valve features:
— bolted bonnet,
— outside screw and yoke,
— rising stems,
— non-rising handwheels,
— single or double gate,
— wedge or parallel seating,
— metallic seating surfaces,
— flanged or butt-welding ends.
It covers valves of the nominal pipe sizes NPS:
— 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24,
corresponding to nominal pipe sizes DN:
— 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600,
applies for pressure class designations:
— 150; 300; 600; 900; 1500; 2500.
This International standard sets forth the requirements for the following gate valve features:
— bolted bonnet,
— outside screw and yoke,
— rising stems,
— non-rising handwheels,
— single or double gate,
— wedge or parallel seating,
— metallic seating surfaces,
— flanged or butt-welding ends.
It covers valves of the nominal pipe sizes NPS:
— 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24,
corresponding to nominal pipe sizes DN:
— 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600,
applies for pressure class designations:
— 150; 300; 600; 900; 1500; 2500.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T16:12:47Z | |
| date available | 2017-09-04T16:12:47Z | |
| date copyright | 03/01/2009 | |
| date issued | 2009 | |
| identifier other | SPSGPCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/76028 | |
| description abstract | This International standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters. This International standard sets forth the requirements for the following gate valve features: — bolted bonnet, — outside screw and yoke, — rising stems, — non-rising handwheels, — single or double gate, — wedge or parallel seating, — metallic seating surfaces, — flanged or butt-welding ends. It covers valves of the nominal pipe sizes NPS: — 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24, corresponding to nominal pipe sizes DN: — 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600, applies for pressure class designations: — 150; 300; 600; 900; 1500; 2500. | |
| language | English | |
| title | API STD 600 | num |
| title | Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets - Twelfth Edition; Incorporates Errata 1 November 2009 | en |
| type | standard | |
| page | 36 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2009 | |
| contenttype | fulltext |