Now showing items 981-1000 of 1822

    • API RP 17B 

      Type: standard
      Source: API - American Petroleum Institute:;2014
      Organization : API - American Petroleum Institute
    • API RP 70I 

      Type: standard
      Source: API - American Petroleum Institute:;2004
      Organization : API - American Petroleum Institute
      Abstract: Scope, Purpose and Objective
      This publication is intended to assist the offshore oil and natural gas drilling and producing operators and contractors in assessing security needs during the performance of oil and natural ...
    • API PUBL 4632 

      Type: standard
      Source: API - American Petroleum Institute:;1995
      Organization : API - American Petroleum Institute
      Abstract: Scope:
      FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS ...
    • API PUBL 4679 

      Type: standard
      Source: API - American Petroleum Institute:;1999
      Organization : API - American Petroleum Institute
      Abstract: This document describes a software simulation package called Amine Unit Air Emissions Model (AMINECalc Version 1.0). This package is designed to estimate hydrocarbon emissions from amine based sour gas and natural gas ...
    • API RP 4G 

      Type: standard
      Source: API - American Petroleum Institute:;2012
      Organization : API - American Petroleum Institute
      Abstract: Objective
      This document provides guidelines and establishes recommended procedures for inspection, maintenance, and repair of items for drilling and well servicing structures, in order to maintain the ...
    • API MPMS 17.11 SPANISH 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
    • API RP 2556 

      Type: standard
      Source: API - American Petroleum Institute:;2008
      Organization : API - American Petroleum Institute
      Abstract: Incrustation is defined, for the purpose of this recommended practice, as any material that adheres to the internal vertical sidewall surfaces of a tank when the tank is otherwise empty.
      Incrustation has the ...
    • API PUBL 329 

      Type: standard
      Source: API - American Petroleum Institute:;1994
      Organization : API - American Petroleum Institute
      Abstract: Scope:
      FOREWORD
      API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS ...
    • API SPEC 5LCP 

      Type: standard
      Source: API - American Petroleum Institute:;2006
      Organization : API - American Petroleum Institute
      Abstract: The purpose of this Specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
      This Specification covers welded steel continuously milled ...
    • API RP 1111 

      Type: standard
      Source: API - American Petroleum Institute:;2015
      Organization : API - American Petroleum Institute
      Abstract: This recommended practice (RP) sets criteria for the design, construction, testing, operation, and maintenance of offshore steel pipelines utilized in the production, production support, or transportation of hydrocarbons; ...
    • API MPMS 9.3 

      Type: standard
      Source: API - American Petroleum Institute:;2012
      Organization : API - American Petroleum Institute
      Abstract: This test method covers the determination, using a glass thermohydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures ...
    • API RP 11V10 

      Type: standard
      Source: API - American Petroleum Institute:;2008
      Organization : API - American Petroleum Institute
      Abstract: Introduction and Organization of This Document
      This API document presents guidelines and recommended practices for the design and operation of intermittent, chamber, and plunger gas-lift systems. ...
    • API RP 575 CHINESE 

      Type: standard
      Source: API - American Petroleum Institute:;2005
      Organization : API - American Petroleum Institute
      Abstract: This document provides useful information and recommended practices for the maintenance and inspection of atmospheric and low-pressure storage tanks. While some of these guidelines may apply to other types of tanks, these ...
    • API RP 934-E RUSSIAN 

      Type: standard
      Source: API - American Petroleum Institute:;2010
      Organization : API - American Petroleum Institute
    • API PUBL 4775 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
      Abstract: Subsurface migration of volatile compounds and vapor intrusion to indoor air is a potential exposure pathway for human occupants of buildings over or near contaminated soils and groundwater. In the past decade, there has ...
    • API MPMS 17.3 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
      Abstract: Scope and Field of Application
      This chapter recommends the water samples and volumes to be taken, the containers to be used, the care and distribution of the samples, and the analytical procedures for ...
    • API STD 682 ERTA 

      Type: standard
      Source: API - American Petroleum Institute:;2006
      Organization : API - American Petroleum Institute
      Abstract: This International Standard specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries.  It is applicable mainly ...
    • API PUBL 4723 

      Type: standard
      Source: API - American Petroleum Institute:;2002
      Organization : API - American Petroleum Institute
      Abstract: INTRODUCTION AND BACKGROUND
      Passage of the Clean Air Act Amendments of 1990 created a number of new compliance challenges for the U.S. petroleum industry. In order to provide improved approaches to meeting these ...
    • API MPMS 10.3 

      Type: standard
      Source: API - American Petroleum Institute:;2013
      Organization : API - American Petroleum Institute
      Abstract: This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure. This centrifuge method for determining water and sediment in crude oils is not entirely ...
    • API MPMS 17.4 

      Type: standard
      Source: API - American Petroleum Institute:;2009
      Organization : API - American Petroleum Institute
      Abstract: Scope and Field of Application
      This standard applies only to quantification by manual gauging of small volumes on marine vessels prior to loading or upon completion of discharge. It does not address ...