IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1501-1520 of 2832

    • IEEE Standard - Health informatics--Personal health device communication - Part 10427: Device specialization--Power Status Monitor of Personal Health Devices 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Guidelines for establishing criteria for application, performance, interchangeability, tests, life cycle costs, and safety requirements of traction power rectifier transformers are established in this standard. Set forth ...
      Subject(s) : design optimization , electrical requirements , IEEE 1653.1(TM) , traction power rectifi er transformers , transit application , commutating impedance , BIL , factory tests , hot spot , traction power duty cycle , overvoltage transient , load cycle , basic lightning impulse insulation , ferroresonance , heavy rail , light rail , partial discharge (PD) service conditions , tests ,

    • IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Established in this standard are criteria for variable selection, performance, design,and qualification of accident monitoring instrumentation for anticipated operational, design basisevents and severe accidents.
      Subject(s) : selection criteria , performance criteria , type variables , design criteria , IEEE 497(TM) , display criteria , severe accidents , accident monitoring ,

    • IEEE Recommended Practice for Transport of Key Management Protocol (KMP) Datagrams 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A message exchange framework based on information elements as a transport method for key management protocol (KMP) datagrams and guidelines for the use of some existing KMPs with IEEE Std 802.15.4 are defined in the ...
      Subject(s) : multiplexed data service , IE , key management protocol , fragmentation , KMP , security , information element , IEEE 802.15.9(TM) ,

    • IEEE Recommended Practice on Software Reliability 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The methods for assessing and predicting the reliability of software, based on a life-cycle approach to software reliability engineering (SRE), are prescribed in this recommended practice. It provides information necessary ...
      Subject(s) : software reliability , IEEE 1633 , software failure modes ,

    • IEEE Standard - Health informatics--Personal health device communication - Part 10424: Device Specialization--Sleep Apnoea Breathing Therapy Equipment (SABTE) - Corrigendum 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between sleep apnoea breathing therapy equipment (SABTE) devices (agents) and managers ...
      Subject(s) : personal health devices , IEEE 11073-10424(TM) , medical device communication , SABTE , sleep apnoea breathing therapy equipment ,

    • IEEE Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Recommendations and requirements for the design and applications of power electronics in land-based (onshore) and marine (offshore) electrical power systems are provided in this standard. A wide range of power electronics ...
      Subject(s) : power electronic building blocks , PEBB , power electronics , integrated power systems , IEEE 1662(TM) ,

    • IEEE Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document is intended to serve as basic reference for the specification and design of field discharge circuits for synchronous machines. It is also intended to provide detailed information about field discharge that ...
      Subject(s) : field suppression , field discharge resistor , field discharge equipment , Field discharge of synchronous machines , field breaker , crowbar , de-excitation ,

    • IEEE Recommended Practice for Space Charge Measurements on High-Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The aim of this recommended practice is establishing a protocol for the measurement of space charges in high-voltage direct-current (HVDC) extruded cables having rated voltage upto 550 kV. Such measurements are prescribed ...
      Subject(s) : power cable testing , space charge measurements , HVDC extruded insulation , IEEE 1732(TM) , power cables ,

    • IEEE Recommended Practice for Software Acquisition - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process is described in this recommended practice. The recommended practices can be applied to ...
      Subject(s) : FOSS , custom developed , acquirer , end user , OTS , off-the-shelf , SaaS , supplier , software acquisition process , IEEE 1062(TM) , software as a service ,

    • IEEE Recommended Practice for Software Acquisition 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process is described in this recommended practice. The recommended practices can be applied to ...
      Subject(s) : FOSS , custom developed , acquirer , end user , OTS , off-the-shelf , SaaS , supplier , software acquisition process , IEEE 1062(TM) , software as a service ,

    • IEEE Recommended Practice for Routing Packets in IEEE 802.15.4 Dynamically Changing Wireless Networks 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The routing of packets in dynamically changing wireless networks is facilitated in this recommended practice. The result is an extension of the area of coverage as the number of nodes increase.
      Subject(s) : mesh-under routing , layer 2 routing , mesh , IEEE 802.15.4(TM) ,

    • IEEE Recommended Practice for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above--Part 3: Recommendations for Performance and Uncertainty Specifications 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Recommendations for summarizing the performance and the expected uncertainty of the reflection coefficient of rectangular-waveguide apertures and interfaces for 110 GHz and above are provided in this recommended practice. ...
      Subject(s) : terahertz , IEEE 1785.3(TM) , waveguide tolerances , performance , specification , millimeter-wave , submillimeter-wave , waveguide apertures , rectangular waveguides , waveguide interfaces , uncertainty of measurement ,

    • IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: General test procedures for performing routine quality control tests that are suitable for high-volume, production line testing are included in this recommended practice. Transformer connections, test methods, circuit ...
      Subject(s) : IEEE C57.138(TM) , production line testing , routine test , distribution transformers ,

    • IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Activities related to preferred power supply (PPS) reliability, including design considerations, analytical studies, operational and maintenance considerations, and interface agreements between a nuclear power generating ...
      Subject(s) : Class 1E , NPGS , reliability , preferred power supply (PPS) , interface agreement , transmission system , IEEE 1792(TM) , nuclear power generating station , offsite power , switchyard ,

    • IEEE Recommended Practice for Nanoscale and Molecular Communication Framework 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A definition, terminology, conceptual model, and standard metrics for ad hoc network communication at the nanoscale are provided. Human-engineered networking is extended by the physical properties of nanoscale communication ...
      Subject(s) : communication networks , nanobioscience , nanoelectrochemical systems , nanostructured materials , nanofluidics , nanowires , nanoelectromechanical systems , nanobots , nanopositioning , nanoscale communication framework , nanomedicine , communication standards , nanophysics , nanoscale devices , nanobiotechnology , simulation , nanotube devices , nanodevice , multi-scale network , communication systems , nanotechnology , nanoscale , quantum mechanics , standards development , IEEE 1906.1 , molecular communication , nanosensors ,

    • IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The protection of motors used in industrial and commercial power systems is covered. It is likely to be of greatest value to the power-oriented engineer with limited experience in the area of protection and control. It can ...
      Subject(s) : unbalanced protection , inverse-time overcurrent element , temperature sensors , relay protection , induction motors , negative sequence characteristics , rotor thermal protection , synchronous motors , coordination , motor protection relay , motor protection , overcurrent protection , resistive temperature detector , rotors , stator thermal protection , IEEE 3004.8 , temperature detector voting , thermal model overload protection , permanent magnet motors , stators ,

    • IEEE Recommended Practice for Learning Technology--IMS Content Packaging Information Model (CP) Version 1.2--Mapping to the Conceptual Model for Resource Aggregation 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Specified in this recommended practice is how the elements and attributes defined in the IMS Content Packaging Information Model (CP) Version 1.2 relate to the components of the conceptual model for resource aggregation ...
      Subject(s) : IEEE 1484.13.6(TM) , digital aggregation , IMS CP , RAMLET , resource aggregation , content aggregation , aggregation format , IMS Content Packaging Information Model , resource aggregation format , conceptual model , digital resource , IEEE 1484.13.4(TM) ,

    • IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type Distribution and Power Transformers - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Recommendations for operation and maintenance of dry-type distribution and power transformers are provided.
      Subject(s) : IEEE C57.94(TM) , distribution transformers , maintenance , operation power transformer , application , dry-type , testing , installation ,

    • IEEE Recommended Practice for Excitation System Models for Power System Stability Studies 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Excitation system and power system stabilizer models suitable for use in large-scale system stability studies are presented. Important excitation limiters and supplementary controls are also included. The model structures ...
      Subject(s) : excitation systems models , IEEE 421.5(TM) , power system stability , excitation limiter models , power system stabilizer models ,

    • IEEE Recommended Practice for Excitation System Models for Power System Stability Studies - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Excitation system and power system stabilizer models suitable for use in large-scale system stability studies are presented. Important excitation limiters and supplementary controls are also included. The model structures ...
      Subject(s) : excitation systems models , IEEE 421.5(TM) , power system stability , excitation limiter models , power system stabilizer models ,