IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1521-1540 of 2832

    • IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type Distribution and Power Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Recommendations for operation and maintenance of dry-type distribution and power transformers are provided.
      Subject(s) : IEEE C57.94(TM) , distribution transformers , maintenance , operation power transformer , application , dry-type , testing , installation ,

    • IEEE Recommended Practice for Implementing an IEC 61850-Based Substation Communications, Protection, Monitoring, and Control System 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The steps and procedures a user should undertake to implement an IEC 61850 substation in both a single and multi-vendor equipment environment are outlined in this recommended practice. Intelligent electronic device (IED) ...
      Subject(s) : sample values , IEEE 2030.100(TM) , IEC 61850 , GOOSE , MMS , SV , substation automation ,

    • IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Described in this recommended practice are criteria for evaluating the reliability of existing industrial and commercial power systems. It is likely to be of greatest value to the power-oriented engineer with limited ...
      Subject(s) : reliability , IEEE 3006.2(TM) , reliability analysis , availability ,

    • IEEE Guide to Understanding, Diagnosing, and Mitigating Stray and Contact Voltage 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Voltage conditions that may arise at publicly and privately accessible locations as a result of the delivery and use of electrical energy are addressed in this guide. This guide is not intended for use as a statement of ...
      Subject(s) : stray voltage , contact voltage , IEEE 1695(TM) ,

    • IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A consensus of recommended practices for system testing in marine electrical engineering as applied specifically to vessels, shipboard systems, and equipment is provided.
      Subject(s) : marine vessels , marine electrical engineering , IEEE 45.6(TM) , shipboard systems , ships ,

    • IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Recommendations are provided for selection, application, and installation of electrical power, signal, control, data, and specialty marine cable systems on shipboard.
      Subject(s) : cable application , cable installation , cable selection , control cable , specialty marine cable , shipboard systems , signal cable , power cable , offshore drilling and production platforms , data cable , IEEE 45.8(TM) , cable systems ,

    • IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Traction power systems experience some of the most extreme variations in local power loads as compared to most other large scale electric power supply networks. These variations create challenges in the construction of ...
      Subject(s) : traction power , railway , energy recovery , energy storage , fixed guideway transportation , wayside energy storage , dc traction , IEEE 1887 , wayside energy storage system ,

    • IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: General and specific recommendations on specification, design, and application of liquid-immersed and dry-type transformers in distributed photovoltaic (DPV) power generation systems for commercial, industrial, and utility ...
      Subject(s) : distributed power generation , PV , photovoltaic , impedance , IEEE C57.159(TM) , winding connection diagram , transformer , electrostatic shield , inverter , harmonics ,

    • IEEE Guide for the Installation of Overhead Transmission Line Conductors 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: General recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires are provided.
      Subject(s) : IEEE 524 , overhead transmission line conductors , overhead groundwires ,

    • IEEE Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide is intended for the application of dissolved gas analysis (DGA) techniques on oil-immersed transformers and reactors applied during factory temperature rise tests. It contains recommended procedures for sampling, ...
      Subject(s) : factory temperature rise tests , dissolved gas analysis ,

    • IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Field testing methodology and techniques are presented for measuring parameters for dc transmission lines and earth electrode lines are discussed in this guide. The topics addressed include the basic requirements of ...
      Subject(s) : impedance frequency characteristic , IEEE 1893(TM) , short-circuit impedance , transmission line parameters , distributed parameters , open-circuit impedance ,

    • IEEE Guide for the Design andInstallation of Cable Systems in Substations - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The design, installation, and protection of wire and cable systems in substations are covered in this guide, with the objective of minimizing cable failures and their consequences
      Subject(s) : handling , communication cable , routing , cable installation , cable selection , cable , fiber-optic cable , transient protection , IEEE 525(TM) , power cable , recommended maintenance , substation , raceway , service conditions , separation of redundant cable , electrical segregation , acceptance testing , pulling tension ,

    • IEEE Guide for the Design andInstallation of Cable Systems in Substations 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The design, installation, and protection of wire and cable systems in substations are covered in this guide, with the objective of minimizing cable failures and their consequences.
      Subject(s) : handling , communication cable , routing , cable installation , cable selection , cable , fiber-optic cable , transient protection , IEEE 525(TM) , power cable , recommended maintenance , substation , raceway , service conditions , separation of redundant cable , electrical segregation , acceptance testing , pulling tension ,

    • IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports--Part 1: Gas Discharge Tubes (GDTs) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Covered in the IEEE C62.42 guide series are surge protective components (SPCs) used in power and telecom surge protective devices (SPDs) and equipment ports. Covered in this standard on gas discharge tube (GDT) technology ...
      Subject(s) : arc region , discharge , capacitance , back-up air-gap device , glow region , two-electrode , holdover voltage , three-electrode , gas discharge tube , sparkover , GDT , insulation resistance , breakdown , IEEE C62.42.1(TM) , follow current ,

    • IEEE Guide for the Benefit Evaluation of Electric Power Grid Customer Demand Response 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A framework for monitoring the effects and evaluating comprehensive benefits of demand response programs is proposed in this guide. From perspectives of ex-ante and ex-post evaluation, this guide introduces the evaluation ...
      Subject(s) : effect monitoring , ex-ante evaluation , ex-post evaluation , demand response , IEEE 2030.6 , benefits ,

    • IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Guidance is provided to specifiers, users and manufacturers of surge-protective devices (SPDs) about the application considerations of SPDs to power distribution systems and associated equipment. This guide applies to SPDs ...
      Subject(s) : grounding , transient , SPD , surge-protective device coordination , internally generated surges , arrester , bonding , lightning , switching , surge-protective device , transient voltage surge suppressor , IEEE C62.72(TM) ,

    • IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II--Synchronous Generator Systems 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The basic factors and general considerations in selecting the class and means of neutral grounding for synchronous generator systems connected to electrical utility systems are provided in this guide. It also provides the ...
      Subject(s) : mechanical stress in generators , unit-connected generation systems , neutral grounding , overvoltages on generator insulation , electric utility systems , IEEE C62.92.2(TM) , synchronous generators ,

    • IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide encompasses the application of surge protective devices (secondary arresters) from the secondary terminals of the distribution transformer to the line side of the service equipment.
      Subject(s) : secondary arrester , Surge protective device ,

    • IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part I: Introduction 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2017
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The application of neutral grounding to three-phase electrical utility systems is described in this guide. It is Part 1 of the IEEE C62.92 series of guides for neutral grounding. This guide presents basic considerations ...
      Subject(s) : neutral grounding , IEEE C62.92.1 , effectively grounding , classes of grounding , means of grounding , undergrounded systems ,

    • IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V - Corrigendum 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2016
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This corrigendum addresses a change in Equation (26) and the list of variables belonging to this equation.
      Subject(s) : IEEE C37.012 ,