IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1641-1660 of 2832

    • IEEE 2001 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: FOREWORD
      The World Wide Web is expanding and its value is increasing as a method for locating and delivering information. This creates a significant engineering challenge. Locating applicable information requires that ...

    • IEEE 1374 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1998
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide addresses the design, equipment applicability, and hardware installation of electrically safe, stand-alone, and grid-connected PV power systems operating at less than 50 kW output. It discusses storage batteries ...
      Subject(s) : ampacity , cable types , PV system ,

    • IEEE 404 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes electrical ratings and test requirements of cable joints used with extruded and laminated dielectric shielded cables rated in preferred voltage steps from 2.5 kV to 500 kV. In addition, it defines ...

    • IEEE C57.119 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice covers temperature rise test procedures for determining those thermal characteristics of power transformers needed to appraise the transformer’s load carrying capabilities at specific loading ...
      Subject(s) : bottom oil temperature , conditioning loads , hottest spot factor , load tap changer , loading , mineral-oil-immersed , power transformers , rated load , thermal capacity , top oil temperature ,

    • IEEE 1497 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 399 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1997
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This Recommended Practice, commonly known as the IEEE Brown Book, is published by the Institute of Electrical and Electronics Engineers, Inc. (IEEE) as a reference source to give plant engineers a better understanding of ...
      Subject(s) : cable ampacity , dc power system studies , ground mat studies , harmonic analysis , load flow studies , motor-starting studies , power system analysis , power system modeling , power system studies , protective coordination studies , reliability studies , short-circuit studies , stability studies , switching transient studies ,

    • IEEE 1394.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This is a full-use standard whose scope is the definition of a peer-to-peer data transport (PPDT) protocol between Serial Bus devices that implement ANSI INCITS 325-1998 1 . The facilities specified include, but ...
      Subject(s) : computers , connect , CSR architecture , peer-to-peer , SBP-2 , transport protocol ,

    • IEEE 683 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: (This foreword is not a part of IEEE Std 683-1976, Block Transfers in CAMAC Systems.)
      A wide variety of block transfer algorithms (or modes) are possible in CAMAC systems. However, a restricted number of such algorithms ...

    • IEEE 802.5V 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2001
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Add the following item to Scope:
      hh) Defines Dedicated Token Ring (DTR) operation at 100 Mbit/s.

    • IEEE C37.20.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers metal-clad switchgear containing, but not limited to, such devices as power circuit breakers, other interrupting devices, switches, control, instrumentation and metering, and protective and regulating ...

    • IEEE N42.17A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The object of this standard is to provide basic performance requirements and verification test methods for portable instruments used in normal environmental conditions for radiation protection of personnel.
      As ...

    • IEEE 3004.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice covers the selection and application of instrument transformers used in industrial and commercial power systems.

    • IEEE 1615 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: MVEDRs collect, record, store, and export data related to motor vehicle predefined events. This standard defines a protocol for MVEDR output data compatibility and export protocols of MVEDR data elements. This standard ...

    • IEEE 1249 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide addresses the application, design concepts, and implementation of computer-based control systems for hydroelectric plant automation. It addresses functional capabilities, performance requirements, interface ...

    • IEEE 802.11AE 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Abstract: A mechanism for prioritization of management frames is provided and a protocol to communicate management frame prioritization policy is specified in this amendment.
      Subject(s) : IEEE 802.11 , IEEE 802.11ae , management , QMF , QoS , quality-of-service management frame ,

    • IEEE C57.12.20 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers certain electrical, dimensional, and mechanical characteristics and safety features of single- and three-phase, 60-Hz, mineral-oil-immersed, self-cooled, overhead-type distribution transformers 500 kVA ...
      Subject(s) : distribution transformer , IEEE C57.12.20 , mineral oil , overhead , transformer ,

    • IEEE 1516.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document defines the format and syntax for recording information in High Level Architecture (HLA) object models, to include objects, attributes, interactions, and parameters. It does not define the specific data (e.g., ...
      Subject(s) : architecture , class attribute , data distribution management , federate , federation , federation execution , federation object model , framework , high level architecture , instance attribute , instance attribute ownership , interaction class , joined federate , object class , object model template , rules , runtime infrastructure , simulation object model , time-constrained , time-regulating ,

    • IEEE 277 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document has been developed as a recommended practice for electrical distribution systems in cement plants with the objective of satisfactory equipment utilization, reliability, performance, safety, and low ...

    • IEEE C57.637 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this guide covers mineral insulating oil commonly defined as transformer oil; definition and description of reclaiming procedures; the test methods used to evaluate the progress and end point of the reclamation ...

    • IEEE 11073-10101A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Within the context of the ISO/IEEE 11073 family of standards for point-of-care (POC) medical device communication (MDC), the nomenclature defined by the base ISO/IEEE 11073- 10101:2004 nomenclature standard is extended by ...