IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1661-1680 of 2832

    • IEEE 1636.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this standard is the definition of an exchange format, utilizing XML, for exchanging maintenance action information (MAI) associated with the removal, repair, and replacement of system components to maintain/support ...
      Subject(s) : automated test system (ATS) , eXtensible markup language (XML) , maintenance action information (MAI) , Software Interface for Maintenance Information Collection and Analysis (SIMICA) , XML schema ,

    • IEEE 1511.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide covers specific methods of failure mode classifications and analysis for shielded power cables rated 5 kV through 46 kV.
      Purpose
      The purpose of this guide is to provide an introduction ...
      Subject(s) : cable failure , chemical failure mode , distribution material failure report , electrical failure mode , general aging failure mode , IEEE 1511.1 , thermal failure mode ,

    • IEEE 1624 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document presents a standard that defines the reliability capability of organizations and identifies the criteria for assessing the reliability capability of an organization. This standard is intended to be usable by ...

    • IEEE 1482.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers on-board devices/systems, with crashworthy memory, that record data to support accident/ incident analysis for rail transit vehicles. The requirements of this standard are limited to event recorder ...

    • IEEE 1584 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical ...
      Subject(s) : arc fault currents , arc in enclosures , arc in open air , arc-flash hazard , arc-flash hazard analysis , arc-flash hazard marking , bolted fault currents , electrical hazard , flash protection boundary , incident energy , personal protective equipment , protective device coordination study , short-circuit study , working distances ,

    • IEEE C63.7 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides information that is useful in constructing an open-area test site (OATS) used to perform radiated emission measurements in the frequency range of 30 MHz to 1000 MHz. Final validity of the test site can ...
      Subject(s) : emission measurement , open-area test sites , radiated emission measurement ,

    • IEEE 1609.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this standard is to specify the services and interfaces of the WAVE RM, including protective mechanisms for security and privacy, applicable and available to all users of DSRC and WAVE mode operations in the ...
      Subject(s) : DSRC , resource manager , WAVE ,

    • IEEE 802.16.1A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Enhancements to the WirelessMAN-Advanced Air Interface to support high-reliability networks are specified in this amendment to IEEE Std 802.16.1-2012.

    • IEEE C57.19.01 INT 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers electrical, dimensional, and related requirements for outdoor power apparatus bushings that have basic impulse insulation levels (BILs) of 200 kV and above. It provides specific values for dimensional ...
      Subject(s) : basic impulse insulation levels (BILs) , cantilever test , capacitance , creepage distance , flashover , line-to-ground voltage , nominal system voltage , power apparatus bushings , power factor ,

    • IEEE C57.12.35 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard sets forth bar-code label requirements for overhead, pad-mounted, and underground-type distribution transformers and step-voltage regulators. Included herein are requirements for data content, symbology, label ...

    • IEEE 522 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide makes suggestions for testing the dielectric strength of the insulation separating the various turns from each other within multiturn form-wound coils to determine the acceptability of the coils. Typical ratings ...
      Subject(s) : ac machines , impulses , surges , testing turn insulation , transients ,

    • IEEE 1900.6 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines the information exchange between spectrum sensors and their clients in radio communication systems. The logical interface and supporting data structures used for information exchange are defined ...
      Subject(s) : cognitive radio , data structure , distributed spectrum sensing , dynamic spectrum access , IEEE 1900.6 , logical interface , sensing information , spectrum sensor ,

    • IEEE 1240 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2000
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document promotes the concepts of reliability, availability, and maintainability (RAM) as applicable to the design, operation, and specification of high-voltage direct current (HVDC) converter stations.
      ...

    • IEEE 1076.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Purpose and scope
      This standard defines IEC 61691-6/IEEE 1076.1™ language, a hardware description language for the description and the simulation of analog, digital, and mixed-signal systems. The ...
      Subject(s) : analog design , computer , computer languages , hardware design , mixed-signal design , VHDL ,

    • IEEE 1547.6 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard builds upon IEEE Std 1547™-2003 for the interconnection of distributed resources (DR) to distribution secondary network systems.1 This standard establishes recommended criteria, requirements, ...
      Subject(s) : distributed resources , distribution grid , distribution secondary networks , electric power systems , grid networks , IEEE 1547.6 , interconnection , spot networks , utility grid ,

    • IEEE 1008 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Inside the Scope
      Software unit testing is a process that includes the performance of test planning, the acquisition of a test set, and the measurement of a test unit against its requirements. Measuring ...
      Subject(s) : bidirectional parallel communications , computers , interfaces , PCs , personal computers , printers ,

    • IEEE 11073-00103 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, this guide describes the landscape of transport-independent applications and information profiles for personal telehealth devices. These ...

    • IEEE C37.30.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers preferred ratings; construction and testing requirements; and application, loading, installation, operation, and maintenance guidelines for all high-voltage enclosed and nonenclosed, indoor and outdoor ...
      Subject(s) : high-voltage switches , IEEE C37.30.1 , indoor switches , outdoor switches ,

    • IEEE 117 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This is a standard test procedure for the thermal evaluation and qualification of electrical insulation systems (EISs) for random-wound ac electric machinery, where thermal degradation is the dominating aging factor. This ...

    • IEEE C57.12.00 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard describes electrical and mechanical requirements of liquid-immersed distribution and power transformers, and autotransformers and regulating transformers, single-phase and polyphase, with voltages of 601 V ...