IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1781-1800 of 2832

    • IEEE 1243 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: For this guide, a transmission line is any overhead line with a phase-to-phase voltage exceeding 69 kV and an average conductor height of more than 10 m. The transmission line is usually shielded by one or more overhead ...
      Subject(s) : grounding , lightning protection , overhead electric power transmission , shielding ,

    • IEEE 1076.4 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: To provide a standard method of modeling ASICs in VHDL. This method is aimed at providing efficient, accurate, and tool independent simulation suitable for large chip-level designs typical of those which are based on ASICs. ...

    • IEEE 21450 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This project develops a set of common functionality for the family of IEEE 1451 smart transducer interface standards. This functionality is independent of the physical communications media. It includes the basic functions ...
      Subject(s) : actuator , application programming interface , communication protocol , network-capable application processor , sensor , smart transducer , transducer electronic data sheet , transducer interface module ,

    • IEEE 802.5 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: For the purpose of compatible interconnection of data processing equipment via a local area network (LAN) using the token ring access method, this part of ISO/IEC 8802
      a) Provides a general description of the token ...
      Subject(s) : DTR C-Port and Station , TKP Access Protocol , Token Ring operation , TXI Access Protocol ,

    • IEEE C95.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this recommended practice is to revise and develop specifications for preferred methods for measuring and computing external radio frequency electromagnetic fields to which persons may be exposed. In addition, ...
      Subject(s) : electromagnetic field computation , electromagnetic field measurements , exposure assessment , non-ionizing radiation , RF/microwave hazard assessment , RF/microwave survey instruments , RF/microwave surveys , specific absorption rate (SAR) assessment ,

    • IEEE 487 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Wire-line communication facilities serving electric supply locations often require special high-voltage protection against the effects of fault-produced ground potential rise or induced voltages, or both. Some of the ...

    • IEEE 386 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes definitions, service conditions, ratings, interchangeable construction features, and tests for loadbreak and deadbreak separable insulated connector systems rated above 600 V, 600 A or less, for ...
      Subject(s) : deadbreak connector , elbow connector , loadbreak connector , power distribution systems , separable conductor , separable insulated connector systems ,

    • IEEE C37.37 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1996
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This loading guide applies to ac high-voltage air switches in excess of 1000 V rated in accordance with IEEE Std C37.30-1992.1 This standard does not apply to switches used in enclosures covered by IEEE Std ...
      Subject(s) : ACCC , allowable continuous current class , current capabilities , emergency loading , highvoltage air switches , outdoor switches ,

    • IEEE C57.100 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to the insulation systems used in all liquid-immersed distribution and power transformers. This standard provides test procedures to evaluate the thermal aging characteristics of insulation systems ...
      Subject(s) : aging , distribution transformers , IEEE C57.100 , life tests , liquid immersed , power transformers , test procedures , thermal evaluatio ,

    • IEEE 525 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document has been developed as a guide for the design, installation, and protection of wire and cable systems in substations with the objective of minimizing cable failures and their consequences. This guide is not ...

    • IEEE 1127 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide identifies significant community acceptance and environmental compatibility items to be considered during the planning and design phases, the construction period, and the operation of electric supply substations, ...
      Subject(s) : A-weighted sound level , commercial zone , hazardous material , industrial zone , noise , permitting process , residential zone , wetlands ,

    • IEEE 1175.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide describes the scope of application and interrelationships for the members of the IEEE 1175 family of standards, and it points the reader to the appropriate standards for clarifying issues involved in effectively ...

    • IEEE 383 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides general requirements and methods for qualifying electric cables, and splices for nuclear facilities. Cable, wire, and splices within or integral to other devices (e.g., instruments, panels, motors) ...

    • IEEE 1070 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide will provide the industry with a generic specification, including design and testing, for transmission modular restoration structure components.
      Subject(s) : box sections , column sections , end plates , foundations , gimbals , guy plates , transmission mutual aid ,

    • IEEE 1676 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this guide is to define and characterize control architecture for high-power electronics from power semiconductor device levels to the power system level. This guide covers the application of power electronics ...
      Subject(s) : ac-dc converter , control and protection , control architecture , custom power , DVR , FACTS , HVDC , IEEE 1676 , MVA , power electronics , Power Electronics Building Block (PEBB) , SSTS , STATCOM ,

    • IEEE C57.12.59 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide applies to dry-type transformers designated as Category I and Category II in IEEE Std C57.12.01-1998.1 Category III transformers have not been included since these are not commonly manufactured and ...

    • IEEE 260.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This standard supersedes ANSI/IEEE Std 260.1-1993 in accordance with IEEE’s policy of periodic standards review and update. Since the 1993 standard was approved, significant changes have occurred in the ...
      Subject(s) : letter symbols , limited typography , metric , quantities , SI , units of measurement ,

    • IEEE 960 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Mechanical, signal electrical, and protocol specifications are given for a modular data bus system, which, while allowing equipment designers a wide choice of solutions, ensure compatibility of all designs that obey the ...
      Subject(s) : bus system , data acquisition , FASTBUS ,

    • IEEE 802.20 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies the physical and medium access control layers of an air interface for interoperable mobile broadband wireless access systems, operating in licensed bands below 3.5 GHz. The system is optimized for ...

    • IEEE 1394 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope:

      IEEE Std 1394b-2002 is a full-use standard whose scope is to provide an amendment to IEEE Std 1394-1995 and a companion to IEEE Std 1394a-2000. This amendment ...

      Subject(s) : bus , computers , high-speed serial bus , interconnect ,