IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1841-1860 of 2832

    • IEEE NESCIR566 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 802.16.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice revises IEEE Std 802.16.2™-2001. In particular, it specifies extensions and modifications addressing two distinct topics. The first is coexistence between multipoint (MP) systems and PTP ...

    • IEEE 1584 INT 1-3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides techniques for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical ...
      Subject(s) : arc fault currents , arc in enclosures , arc in open air , arc-flash hazard , arc-flash hazard analysis , arc-flash hazard marking , bolted fault currents , electrical hazard , flash protection boundary , incident energy , personal protective equipment , protective device coordination study , short-circuit study , working distances ,

    • IEEE 1517 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard draws on IEEE Std 12207™-2008 to describe system and software reuse processes.1 It describes the relationship of reuse processes to system life cycle processes described in Clause 6 (System ...
      Subject(s) : asset , domain engineering , process , reuse , software life cycle , system life cycle ,

    • IEEE 379 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers the application of the single-failure criterion to the electrical power, instrumentation, and control portions of nuclear power generating station safety systems.

    • IEEE 1462 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 896.5 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1995
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The initial work in development of the Futurebus+m specification was done under the auspices of the IEEE Computer Society Microprocessor Standards Committee. In 1988, both the United States Navy's Next Generation Computer ...

    • IEEE 1260 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      A set of procedures to be followed to cope with reradiation of AM broadcast signals from power lines and other large metallic structures is provided. Reradiation may be described as electromagnetic waves radiated ...

    • IEEE C93.4 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard applies to power-line carrier (PLC) line-tuning equipment connected between the coupling capacitors and PLC transmitter/receiver terminals operating in the frequency range of 30 kHz to 500 kHz over power ...

    • IEEE C57.140 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The intent of this guide is to assist the working groups within the IEEE Transformers Committee; thus, specific examples were taken from the transformer-related standards. It should be recognized that identification of ...

    • IEEE N42.25 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes methods for the calibration and use of gas proportional counters with and without active guard detectors. This standard also establishes methods for measuring the alpha and beta counting plateau, ...

    • IEEE 802.15.4P 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2014
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.15.4™-2011 specifies a PHY for use in equipment intended to address rail transportation industry needs and to meet US positive train control (PTC) regulatory requirements and similar ...

    • IEEE 442 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      Throughout the years, many utilities, consultants, and testing firms have measured soil thermal resistivity both in situ and in the laboratory on selected soil samples. Such measurements ...

    • IEEE 1003.13 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1673 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document provides specific requirements for field installed sealing between a pressurized system (stream) containing flammable or combustible process fluids which is connected directly or indirectly to an electrical ...

    • IEEE 80 ERTA 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide is primarily concerned with outdoor ac substations, either conventional or gas-insulated. Distribution, transmission, and generating plant substations are included. With proper caution, the methods described ...

    • IEEE 80 INT 1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide is primarily concerned with outdoor ac substations, either conventional or gas-insulated. Distribution, transmission, and generating plant substations are included. With proper caution, the methods described ...
      Subject(s) : ground grids , grounding , substation design , substation grounding ,

    • IEEE N323A ERTA 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes specific requirements for portable radiation protection instruments used for detection and measurement of levels of ionizing radiation fields or levels of radioactive surface contamination.
      For ...

    • IEEE 1301.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This is a detail standard for subracks, plug-in-units, printed boards, and backplanes to be used in conjunction with IEEE Std 1301-19911 and a 2.5 mm connector in accordance with IEC 48B (Central Office) 245.

    • IEEE 1193 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Standard frequency generators include atomic frequency standards, quartz oscillators, dielectric resonator oscillators (DROs), yttrium-iron-garnet (YIG) oscillators, cavity oscillators, sapphire oscillators, and thinfilm ...