IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1901-1920 of 2832

    • IEEE C57.12.37 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides a basis for electronic reporting of transformer test data on liquid-immersed distribution transformers. This standard defines how to format and report the standard test data when electronic reporting ...

    • IEEE N42.35 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This standard describes the performance requirements for portal monitor instruments. The requirements stated are based on instruments used in support of efforts associated with the United States Department of ...

    • IEEE 1554 ERTA 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.

    • IEEE 1156.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This standard is designed for use in conjunction with other documents such as the IEEE 1101 group of standards, the IEEE 896 group of standards, the IEEE 1596 group of standards, the IEEE 1014 group of standards, ...

    • IEEE 26513 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This International Standard supports the interest of software users in receiving consistent, complete, accurate, and usable documentation. This International Standard defines the process in which user documentation products ...
      Subject(s) : documentation review , editing , information management , software user documentation , usability testing ,

    • IEEE 802.16 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile point-to-multipoint broadband wireless access (BWA) systems providing multiple ...

    • IEEE 3333.1.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2015
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard establishes methods for visual saliency prediction, visual contents analysis, and subjective assessment for quantifying the visual discomfort and quality of experience (QoE) of three-dimensional (3D) image and video.

    • IEEE 528 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Overview
      This standard presents terms and definitions relating to inertial sensors. Usage as understood by the inertial sensor community is given preference over general technical usage of the terms ...

    • IEEE 62582-1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Scope and object
      This part of IEC/IEEE 62582 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment ...

    • IEEE 336 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and systems of a nuclear facility while in the process of installing, ...
      Subject(s) : Class 1E , configuration management , constructability reviews , functional testing , inspection procedures , multi-unit , nuclear facilities , plant design bases , post-installation inspection , post-maintenance test , post-modification test , pre-installation , test plans , test procedures ,

    • IEEE 11073-10103 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard extends the base nomenclature provided in ISO/IEEE 11073-10101:20041 to support terminology for implantable cardiac devices. Devices within the scope of this nomenclature are implantable devices ...

    • IEEE C37.113 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The study of transmission line protection offers an opportunity to examine many fundamental relaying considerations that apply, in one degree or another, to the protection of other types of power system equipment. Each ...
      Subject(s) : protective relaying , relay application , relaying , transmission line protection ,

    • IEEE C62.92.5 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword
      This guide is a part of a series on neutral grounding in electrical utility systems. When the series of documents are approved and published, they will replace IEEE Std 143-1954, IEEE Guide for Ground-Fault ...
      Subject(s) : electrical utility systems , equipment neutral grounding , grounding , neutral grounding , series compensation , subtransmission systems , transformer tertiary systems , transmission systems ,

    • IEEE 15026-1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of ISO/IEC 15026 defines terms and establishes an extensive and organized set of concepts and their relationships, thereby establishing a basis for shared understanding of the concepts and principles central to ...
      Subject(s) : argument , assurance case , claim , computer software , computers , data processing , data security , definitions , IEEE 15026-1 , integrity level , life cycle , process , product design , quality assurance , quality control , reliability , safety , security , software assurance , software engineering , software engineering techniques , system , systems assurance , systems engineering , uncertainty , vocabulary ,

    • IEEE 1505 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this standard is the development of a common receiver fixture interface (RFI) specification that is based upon available commercial standards integrated under a common open architecture. This ...
      Subject(s) : connector , fixture , framework , interface , interoperability , mass-interconnect , quick disconnect , receiver , specification ,

    • IEEE 1900.4.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides a detailed description of interfaces and service access points defined in the baseline, IEEE Std 1900.4TM, enabling distributed decision making in heterogeneous wireless networks and ...

    • IEEE 1516 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document provides an overview of the High Level Architecture (HLA), defines a family of related HLA documents, and defines the principles of HLA in terms of responsibilities that federates (simulations, supporting ...
      Subject(s) : architecture , class attribute , federate , federation , federation execution , federation object model , framework , High Level Architecture , instance attribute , interaction class , joined federate , object class , object model template , rules , runtime infrastructure , simulation object model ,

    • IEEE 1459 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document provides definitions of electric power to quantify the flow of electrical energy in singlephase and three-phase circuits under sinusoidal, nonsinusoidal, balanced, and unbalanced conditions.
      Pur ...
      Subject(s) : active power , apparent power , nonactive power , power factor , reactive power , total harmonic distortion ,

    • IEEE 664 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The purpose of this guide is to describe the current methodologies, including apparatus, procedures, and measurement accuracies, for the testing of vibration dampers. In addition, some basic guidance is also provided to ...

    • IEEE 1015 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice provides information for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, ...
      Subject(s) : circuit breaker evaluation , circuit breakers , insulated case , insulated-case circuit breakers , low-voltage circuit breaker , low-voltage power circuit breaker , low-voltage protection , low-voltage protection device , molded case , molded-case circuit breaker , overcurrent protection , power circuit breaker , rating , testing ,