IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 2161-2180 of 2832

    • IEEE C37.22 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1997
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreword 
      (This foreword is not part of ANSI C37.22-1997, Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear.)
      This new standard ...

    • IEEE N42.17C 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Foreward
      (This Foreword is not a part of ANSI N42.17C-1989, American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Extreme Environmental Conditions.) ...

    • IEEE 1656 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide is applicable to wildlife protective products installed on overhead electrical distribution systems rated up to and including 38 kV. The guide provides test recommendations regarding these products that are in ...
      Subject(s) : tests for wildlife protective products , wildlife deterrent , wildlife guard , wildlife protective product ,

    • IEEE C63.23 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: In standardized emissions compliance measurements, the emission level of an equipment under test (EUT) is measured, after which compliance with the associated limit is determined. The measured emission level is an approximation ...

    • IEEE C62.48 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide applies to surge-protective devices (SSPDs) manufactured to be connected to 50 Hz or 60 z ac power circuits rated at 100–1000 V rms.
      This guide describes the effects on SPDs of power system disturbances ...
      Subject(s) : harmonics , noise , power system disturbance , surge-protective device (SPD) , swell , voltage sag , voltage surge ,

    • IEEE 1413.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2002
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this guide is processes and methodologies for conducting reliability predictions for electronic systems and equipment. This guide focuses on hardware reliability prediction methodologies, and specifically ...
      Subject(s) : baseline , classic reliability , constant failure rate , estimation , failure , goal , item , operating environment , reliability prediction , requirement , system life cycle ,

    • IEEE 3007.2 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice covers the maintenance of industrial and commercial power systems. It covers the fundamentals of electrical equipment maintenance, how to develop successful maintenance strategies, and the common ...
      Subject(s) : failure effect , failure mode , failure modes and effects analysis , failure modes , effects , and criticality analysis , hidden/latent failure , predictive maintenance , preventive maintenance , probability , reliability , reliability-centered maintenance , safety-related work practices ,

    • IEEE 602 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: IEEE Std 602, commonly known as the IEEE White Book™, is published by the Institute of Electrical and Electronics Engineers (IEEE) to provide a recommended practice for the design and operation of electric ...

    • IEEE 14471 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2010
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Since CASE adoption is a subject of the broader technology transition problem, this Technical Report addresses the adoption practices appropriate for a wide range of computing organisations. This Technical Report neither ...
      Subject(s) : CASE tools , computer-aided software engineering (CASE) , information technology , pilot project processes , process , tool adoption , tool evaluation , tool selection ,

    • IEEE 1453.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This part of IEC 61000 provides guidance on principles which can be used as the basis for determining the requirements for the connection of fluctuating installations to MV, HV and EHV public power systems (LV installations ...

    • IEEE C57.116 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Forward
      (This Foreword is not a part of IEEE C57.116–1989, IEEE Guide for Transformers Directly Connected to Generators.)
      ANSI/IEEE C57.12.00–1987, IEEE Standard General Requirements for Liquid Immersed ...

    • IEEE 1394.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2009
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This is a full-use standard whose scope is to extend the already defined asynchronous and isochronous services of High Performance Serial Bus beyond the local bus by means of a device, the bridge, which consists of two ...
      Subject(s) : bridge , bus , computer , high performance serial bus , interconnect ,

    • IEEE C63.10 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called ...

    • IEEE 1722 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2011
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard specifies the protocol, data encapsulations, and presentation time procedures used to ensure interoperability between audio- and video-based end stations that use standard networking services provided by all ...
      Subject(s) : bridged LAN , IEC 61883 , IEEE 1722 , IEEE 802.1 AVB protocols , IEEE 802.1AS , IEEE 802.1BA , IEEE 802.1Qat , IEEE 802.1Qav , local area network (LAN) , quality of service , time synchronization , timesensitive media streaming ,

    • IEEE 1905.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2013
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines an abstraction layer for multiple home network technologies. The abstraction layer provides a common data and control service access point to the heterogeneous home network technologies described in ...

    • IEEE C57.144 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2004
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The intent of this guide is to assist the working groups within the IEEE Transformers Committee; thus, specific examples were taken from the transformer-related standards. It should be recognized that identification of ...
      Subject(s) : conversion , dimensions , metric , transformers , units ,

    • IEEE C37.91 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2008
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The scope of this guide includes general philosophy, practical applications, and economic considerations involved in power transformer protection.
      Emphasis is placed on practical applications. General philosophy and ...
      Subject(s) : volts-per-hertz protection ,

    • IEEE C57.19.01 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers electrical, dimensional, and related requirements for outdoor power apparatus bushings that have basic impulse insulation levels (BILs) of 200 kV and above. It provides specific values for dimensional ...
      Subject(s) : basic impulse insulation levels (BILs) , cantilever test , capacitance , creepage distance , flashover , line-to-ground voltage , nominal system voltage , power apparatus bushings , power factor ,

    • IEEE 802.15.3 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2003
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines the PHY and MAC specifications for high data rate wireless connectivity with fixed, portable and moving devices within or entering a personal operating space. A goal of this standard will be to achieve ...

    • IEEE 421.1 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2007
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines elements and commonly used components in excitation control systems and contains definitions for excitation systems as applied to synchronous machines. These definitions should be useful in the following ...