IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions
Now showing items 2301-2320 of 2832
-
IEEE N42.20
Abstract: Foreword
The purpose of this standard is to specify performance and design criteria for personal electronic monitors used for the determination of personal dose equivalent, or dose equivalent rate from external sources, ... -
IEEE 1290
Abstract: Foreword
Motors used to drive valve operators in nuclear power generating stations are discussed. Guidelines to evaluate the adequacy of motors used to drive valve operators; to provide recommendations for motor ...Subject(s) : generating stations , motor application , motor control , motor protection , motor testing , motors , nuclear power , nuclear power generating stations , valve operation , valve operators , valves , -
IEEE C37.122 ERTA
Abstract: This standard establishes ratings and requirements for planning, design, testing, installation, and operation of gas-insulated substations for alternating-current applications above 52 kV. Typical installations are assemblies ...Subject(s) : gas-insulated metal enclosed switchgear , gas-insulated substation , gas-insulated switchgear , GIS , GIS design , GIS equipment , GIS installation , GIS testing , IEEE C37.122 , SF6 , sulfur hexafluoride , -
IEEE 1050
Abstract: This application guide was developed to identify instrumentation and control (I&C) equipment grounding methods to achieve both a suitable level of protection for personnel and equipment, and suitable electric noise immunity ...Subject(s) : control , generating stations , grounding , I&C , instrumentation , -
IEEE C37.99
Abstract: This guide applies to the protection of shunt power capacitor banks and filter capacitor banks. Included are guidelines for reliable applications of protection methods intended for use in many shunt capacitor applications ... -
IEEE 1679
Abstract: This document covers recommended information for an objective evaluation of an emerging energy storage technology by a potential user for any stationary application. Energy storage technologies are those that provide a ...Subject(s) : battery , cycling service , electric double-layer capacitor , energy storage , flywheel , standby service , stationary application , -
IEEE C57.12.31
Abstract: This standard covers conformance tests and requirements for the enclosure integrity of pole-mounted equipment containing apparatus energized in excess of 600 V, typically not accessible to the general public, such as but ...Subject(s) : coating integrity , enclosure integrity , pole-mounted equipment , switches , transformers , -
IEEE 1095
Abstract: The procedures for installation described in this guide apply to all types of synchronous generators and generator/motors rated 5 MVA and above to be coupled to hydraulic turbines or hydraulic pump/turbines having vertical ... -
IEEE N323C
Abstract: This standard establishes test and calibration requirements for air monitoring instruments used for detection and measurement of airborne radioactive substances. The appendices of this standard provide reference information. ...Subject(s) : calibration , radioactive air monitoring , tests , -
IEEE C37.238
Abstract: This standard specifies a common profile for the use of IEEE 1588 Precision Time Protocol (PTP) in power system protection, control, automation, and data communication applications utilizing an Ethernet communications ...Subject(s) : grandmaster clock , IEEE 1588 , power substation , precise time synchronization , Precision Time Protocol (PTP) , sample synchronization , slave-only clock , synchrophasors , transparent clock , -
IEEE N323
Abstract: This standard establishes calibration methods for portable radiation protection instruments used for detection and measurement of levels of ionizing radiation fields or levels of radioactive surface contamination. For ... -
IEEE 1368
Abstract: This guide identifies distribution reliability indices and factors that affect their calculation. It includes indices, which are useful today, as well as ones that may be useful in the future. The indices are intended to ... -
IEEE P802.21A/D06
Abstract: This amendment specifies the extensions to IEEE Std 802.21-2008 for security mechanisms to protect media independent handover services and mechanisms to use MIH to assist proactive authentications to reduce the latency due ...Subject(s) : proactive authentication , security protection , Service access authentication , -
IEEE P802.11AF/D5.0
Abstract: This document defines enhancements to the 802.11 PHYs and MAC to support operation in the TV bands white spaces. -
IEEE C57.12.44
Abstract: This standard describes certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors. They are ...Subject(s) : grid network , network , protector , spot network , -
IEEE 1175.3
Abstract: Computer-Aided Software Engineering (CASE) tools are used to describe the behavior of software using a variety of different design notations. These may be graphical or textual in nature, or they may be a combination. This ...Subject(s) : Computer-Aided Software Engineering (CASE) tools , Semantic Transfer Language (STL) , software behavior concept , transfer syntax , -
IEEE 1278
Abstract: This standard is part of a proposed set of standards for DIS applications. Each standard in the proposed set describes one or more of the several elements that constitute the DIS environment. As a whole the set of standards ... -
IEEE 101
Abstract: Introduction
This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer ... -
IEEE 802.16P
Abstract: Enhancements to the WirelessMAN-OFDMA Air Interface, an air interface designated as "IMT-2000" by the International Telecommunication Union—Radiocommunication Sector (ITU-R), are specified by this amendment. The ...

درباره ما