• 0
    • ارسال درخواست
    • حذف همه
    • Industrial Standards
    • Defence Standards
  • درباره ما
  • درخواست موردی
  • فهرست استانداردها
    • Industrial Standards
    • Defence Standards
  • راهنما
  • Login
  • لیست خرید شما 0
    • ارسال درخواست
    • حذف همه
View Item 
  •   YSE
  • Industrial Standards
  • IEEE - The Institute of Electrical and Electronics Engineers, Inc.
  • View Item
  •   YSE
  • Industrial Standards
  • IEEE - The Institute of Electrical and Electronics Engineers, Inc.
  • View Item
  • All Fields
  • Title(or Doc Num)
  • Organization
  • Year
  • Subject
Advanced Search
JavaScript is disabled for your browser. Some features of this site may not work without it.

Archive

IEEE N323

Radiation Protection Instrumentation Test and Calibration

Organization:
IEEE - The Institute of Electrical and Electronics Engineers, Inc.
Year: 1993

Abstract: This standard establishes calibration methods for portable radiation protection instruments used for detection and measurement of levels of ionizing radiation fields or levels of radioactive surface contamination. For purposes of this standard, portable radiation protection instruments are those which are carried by hand to a specific facility or location for use. Although this standard is specific to portable radiation protection instrumentation, the basic calibration principles may be applicable to radiation detection instrumentation in general.
Included within the scope of this standard are conditions, equipment, and techniques for calibration as well as the degree of precision and accuracy required. Alpha, beta, photon, and neutron radiations are considered. Passive integrating dosimetric devices such as film, thermoluminescent, and chemical dosimeters are outside the scope of this standard, but the basic principles and intent may apply. In cases where integrating capability is included along with rate measurement or detection, this standard shall apply.
Throughout these criteria, four verbs have been used to indicate the degree of rigor intended by the specific criterion. “Shall” and “will” indicate a minimum criterion that must be met, while “should” and “would” indicate a criterion that is recommended as good practice and is to be applied when practical.
URI: https://yse.yabesh.ir/std/handle/yse/95046
Collections :
  • IEEE - The Institute of Electrical and Electronics Engineers, Inc.
  • Download PDF : (219.0Kb)
  • Show Full MetaData Hide Full MetaData
  • Statistics

    IEEE N323

Show full item record

contributor authorIEEE - The Institute of Electrical and Electronics Engineers, Inc.
date accessioned2017-09-04T16:31:38Z
date available2017-09-04T16:31:38Z
date copyright01/01/1978 (R 1993)
date issued1993
identifier otherUPFNCAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/95046
description abstractThis standard establishes calibration methods for portable radiation protection instruments used for detection and measurement of levels of ionizing radiation fields or levels of radioactive surface contamination. For purposes of this standard, portable radiation protection instruments are those which are carried by hand to a specific facility or location for use. Although this standard is specific to portable radiation protection instrumentation, the basic calibration principles may be applicable to radiation detection instrumentation in general.
Included within the scope of this standard are conditions, equipment, and techniques for calibration as well as the degree of precision and accuracy required. Alpha, beta, photon, and neutron radiations are considered. Passive integrating dosimetric devices such as film, thermoluminescent, and chemical dosimeters are outside the scope of this standard, but the basic principles and intent may apply. In cases where integrating capability is included along with rate measurement or detection, this standard shall apply.
Throughout these criteria, four verbs have been used to indicate the degree of rigor intended by the specific criterion. “Shall” and “will” indicate a minimum criterion that must be met, while “should” and “would” indicate a criterion that is recommended as good practice and is to be applied when practical.
languageEnglish
titleIEEE N323num
titleRadiation Protection Instrumentation Test and Calibrationen
typestandard
page21
statusActive
treeIEEE - The Institute of Electrical and Electronics Engineers, Inc.:;1993
contenttypefulltext
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian
 
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian