درباره ما
MIL-E-17777D
ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:42:58Z | |
| date available | 2017-09-04T16:42:58Z | |
| date copyright | 02/27/1984 | |
| date issued | 1984 | |
| identifier other | BSKKDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/106235 | |
| description abstract | This specification covers round section uncoated (plain) carbon-graphite electrodes for arc-welding, round, half-round and rectangular section copper-coated carbon-graphite electrodes for air carbon-are cutting, and round section jointed copper-coated carbon-graphite electrodes for air carbon-arc cutting. The electrodes shall be furnished in the types and sizes shown in table I, as specified (see 6.2.1). TABLE I. Types and sizes. Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-C Round carbon-graphite 1/81 5/32, 3/16, 1/4 Circular 12 (plain-uncoated) 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17 MIL-CuC-A Round copper-coated 1/8, 5/32, 3/16, 1/4 Circular 12 carbon-graphite 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 2036Z by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. TABLE I. Types and sizes. - Continued Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-CuC-B Half-round copper-coated 3/8, 1/2, 5/8 Semi- 18 carbon-graphite circular MIL-CuC-C Round copper-coated- 5/16, 3/8- Circular 12 carbon-graphite with 1/2 14 machined lock-joint ends 5/8 15 3/4, 1 17 MIL-CuC-D Rectangular copper-coated --- 5/32×3/8 12 carbon-graphite 3/16×5/8 Intended Use: Type MIL-C electrodes are intended for use with the carbon-arc welding process. Type MIL-CuC-A, MIL-CuC-B, and MIL-CuC-D electrodes are particularly suited to air carbon arc cutting and gouging operations. Type MIL-CuC-C electrodes are particularly suited to air carbon-arc cutting and gouging operations with little or no stub loss. | |
| language | English | |
| title | MIL-E-17777D | num |
| title | ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED | en |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1984 | |
| contenttype | fulltext |
