درباره ما
MIL-E-17777D
ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1984
Abstract: This specification covers round section uncoated (plain) carbon-graphite electrodes for arc-welding, round, half-round and rectangular section copper-coated carbon-graphite electrodes for air carbon-are cutting, and round section jointed copper-coated carbon-graphite electrodes for air carbon-arc cutting.
The electrodes shall be furnished in the types and sizes shown in table I, as specified (see 6.2.1). TABLE I. Types and sizes.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 2036Z by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. TABLE I. Types and sizes. - Continued
Intended Use: Type MIL-C electrodes are intended for use with the carbon-arc welding process. Type MIL-CuC-A, MIL-CuC-B, and MIL-CuC-D electrodes are particularly suited to air carbon arc cutting and gouging operations. Type MIL-CuC-C electrodes are particularly suited to air carbon-arc cutting and gouging operations with little or no stub loss.
The electrodes shall be furnished in the types and sizes shown in table I, as specified (see 6.2.1). TABLE I. Types and sizes.
Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-C Round carbon-graphite 1/81 5/32, 3/16, 1/4 Circular 12 (plain-uncoated) 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17 MIL-CuC-A Round copper-coated 1/8, 5/32, 3/16, 1/4 Circular 12 carbon-graphite 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 2036Z by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. TABLE I. Types and sizes. - Continued
Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-CuC-B Half-round copper-coated 3/8, 1/2, 5/8 Semi- 18 carbon-graphite circular MIL-CuC-C Round copper-coated- 5/16, 3/8- Circular 12 carbon-graphite with 1/2 14 machined lock-joint ends 5/8 15 3/4, 1 17 MIL-CuC-D Rectangular copper-coated --- 5/32×3/8 12 carbon-graphite 3/16×5/8
Intended Use: Type MIL-C electrodes are intended for use with the carbon-arc welding process. Type MIL-CuC-A, MIL-CuC-B, and MIL-CuC-D electrodes are particularly suited to air carbon arc cutting and gouging operations. Type MIL-CuC-C electrodes are particularly suited to air carbon-arc cutting and gouging operations with little or no stub loss.
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:42:58Z | |
| date available | 2017-09-04T16:42:58Z | |
| date copyright | 02/27/1984 | |
| date issued | 1984 | |
| identifier other | BSKKDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/106235 | |
| description abstract | This specification covers round section uncoated (plain) carbon-graphite electrodes for arc-welding, round, half-round and rectangular section copper-coated carbon-graphite electrodes for air carbon-are cutting, and round section jointed copper-coated carbon-graphite electrodes for air carbon-arc cutting. The electrodes shall be furnished in the types and sizes shown in table I, as specified (see 6.2.1). TABLE I. Types and sizes. Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-C Round carbon-graphite 1/81 5/32, 3/16, 1/4 Circular 12 (plain-uncoated) 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17 MIL-CuC-A Round copper-coated 1/8, 5/32, 3/16, 1/4 Circular 12 carbon-graphite 5/16 14 3/8 15 1/2, 5/8, 3/4, 1 17 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 55Z3, Department of the Navy, Washington, DC 2036Z by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. TABLE I. Types and sizes. - Continued Nominal size (inches) ---------------------------------------------- CrossType Description Diameter section Length ------------------------------------------------------------------------------- MIL-CuC-B Half-round copper-coated 3/8, 1/2, 5/8 Semi- 18 carbon-graphite circular MIL-CuC-C Round copper-coated- 5/16, 3/8- Circular 12 carbon-graphite with 1/2 14 machined lock-joint ends 5/8 15 3/4, 1 17 MIL-CuC-D Rectangular copper-coated --- 5/32×3/8 12 carbon-graphite 3/16×5/8 Intended Use: Type MIL-C electrodes are intended for use with the carbon-arc welding process. Type MIL-CuC-A, MIL-CuC-B, and MIL-CuC-D electrodes are particularly suited to air carbon arc cutting and gouging operations. Type MIL-CuC-C electrodes are particularly suited to air carbon-arc cutting and gouging operations with little or no stub loss. | |
| language | English | |
| title | MIL-E-17777D | num |
| title | ELECTRODES, CUTTING AND WELDING, CARBON-GRAPHITE, UNCOATED AND COPPER-COATED | en |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1984 | |
| contenttype | fulltext |