درباره ما
MIL-STD-1399 -390
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 390 ELECTRIC POWER, DIRECT CURRENT, (OTHER THAN SHIP'S BATTERY) FOR SUBMARINES (METRIC)
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1987
Abstract: This standard defines and establishes interface requirements for submarine equipments utilizing dc electric power from sources other than the main storage battery to ensure compatibility between such user equipments and the power system, and between individual user equipments. It defines the submarine electric power system characteristics, requires that user equipments be designed to operate from power systems with these characteristics, and restricts any adverse effect of any user equipments on the power system. This standard does not apply to, nor shall it be used for, the design of ship service dc power system loads connected to the main storage battery.
The basic characteristics and constraints categories concerned with this interface are shown symbolically on figure 1. The interface, as it concerns the characteristics of dc electric power, is located at the input terminals of any user equipment. Intended Use: This standard does not prohibit the use of 60 Hz power. The dc electric power, as specified herein, will be in addition to the primary shipboard ac electric power as specified in DOD-STD-1399, section 300.
The basic characteristics and constraints categories concerned with this interface are shown symbolically on figure 1. The interface, as it concerns the characteristics of dc electric power, is located at the input terminals of any user equipment. Intended Use: This standard does not prohibit the use of 60 Hz power. The dc electric power, as specified herein, will be in addition to the primary shipboard ac electric power as specified in DOD-STD-1399, section 300.
Subject: Dc power
Collections
:
-
Statistics
MIL-STD-1399 -390
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:43:42Z | |
| date available | 2017-09-04T16:43:42Z | |
| date copyright | 32052 | |
| date issued | 1987 | |
| identifier other | VUZPDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/106998 | |
| description abstract | This standard defines and establishes interface requirements for submarine equipments utilizing dc electric power from sources other than the main storage battery to ensure compatibility between such user equipments and the power system, and between individual user equipments. It defines the submarine electric power system characteristics, requires that user equipments be designed to operate from power systems with these characteristics, and restricts any adverse effect of any user equipments on the power system. This standard does not apply to, nor shall it be used for, the design of ship service dc power system loads connected to the main storage battery. The basic characteristics and constraints categories concerned with this interface are shown symbolically on figure 1. The interface, as it concerns the characteristics of dc electric power, is located at the input terminals of any user equipment. Intended Use: This standard does not prohibit the use of 60 Hz power. The dc electric power, as specified herein, will be in addition to the primary shipboard ac electric power as specified in DOD-STD-1399, section 300. | |
| language | English | |
| title | MIL-STD-1399 -390 | num |
| title | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 390 ELECTRIC POWER, DIRECT CURRENT, (OTHER THAN SHIP'S BATTERY) FOR SUBMARINES (METRIC) | en |
| type | standard | |
| page | 47 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987 | |
| contenttype | fulltext | |
| subject keywords | Dc power | |
| subject keywords | EMI | |
| subject keywords | Interface characteristics | |
| subject keywords | Ripple voltage |