MIL-STD-1683B

NAVY - SH - Naval Sea Systems Command (Ship Systems)

CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE

Organization:

NAVY - SH - Naval Sea Systems Command (Ship Systems)

Year: 1989

Abstract: This standard is intended for use in selecting the proper connector shell size and insert combination to fit particular MIL-C-915, MIL-C-24640, and MIL-C-24643 cables. In addition, it includes wiring information (cable conductor to connector contact assignments), data for selecting connector hardware accessories, and information regarding certain rectangular connectors.
This standard is to be used as guidance for general shipboard interfacing of cables and connectors. There may be specific applications which require a connector and cable combination other than the combination recommended by this standard.
General connectors shall be as specified in MIL-C-5015.
High density, high shock connectors shall be as specified in MIL-C-28840.
Rectangular connectors used for rack and panel and similar applications shall be as specified in MIL-C-28731.
Specific cables shall be as specified in MIL-C-915.
Lightweight low smoke cables shall be as specified in MIL-C-24640.
Standard low smoke cables shall be as specified in MIL-C-24643. Intended Use: This document is intended to be used in the matching of electric cables to the connector best suited to that cable for general applications. There may be special applications that require a different connector for a particular cable. These situations are not within the scope of this document.

URI: https://yse.yabesh.ir/std/handle/yse/108623

Subject: Aluminum alloy

Collections :

NAVY - SH - Naval Sea Systems Command (Ship Systems)

Show full item record

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T16:45:21Z
date available	2017-09-04T16:45:21Z
date copyright	03/31/1989
date issued	1989
identifier other	BTAQDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/108623
description abstract	This standard is intended for use in selecting the proper connector shell size and insert combination to fit particular MIL-C-915, MIL-C-24640, and MIL-C-24643 cables. In addition, it includes wiring information (cable conductor to connector contact assignments), data for selecting connector hardware accessories, and information regarding certain rectangular connectors. This standard is to be used as guidance for general shipboard interfacing of cables and connectors. There may be specific applications which require a connector and cable combination other than the combination recommended by this standard. General connectors shall be as specified in MIL-C-5015. High density, high shock connectors shall be as specified in MIL-C-28840. Rectangular connectors used for rack and panel and similar applications shall be as specified in MIL-C-28731. Specific cables shall be as specified in MIL-C-915. Lightweight low smoke cables shall be as specified in MIL-C-24640. Standard low smoke cables shall be as specified in MIL-C-24643. Intended Use: This document is intended to be used in the matching of electric cables to the connector best suited to that cable for general applications. There may be special applications that require a different connector for a particular cable. These situations are not within the scope of this document.
language	English
title	MIL-STD-1683B	num
title	CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE	en
type	standard
page	196
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
contenttype	fulltext
subject keywords	Aluminum alloy
subject keywords	Backshells
subject keywords	Insert arrangement
subject keywords	Parts numbering systems
subject keywords	Stainless steel
subject keywords	Wiring