درباره ما
NASA-STD-5005 REV D
STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
Year: 2013
Abstract: Purpose
The purpose of this Standard is to establish requirements and guidance for design and fabrication of ground support equipment (GSE) to assist National Aeronautics and Space Administration (NASA) space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE.
Applicability
a. This Standard is applicable to NASA space flight programs and its use is at the discretion of each program. This Standard establishes a set of GSE design requirements for NASA programs and projects. This Standard is intended for use in establishing uniform engineering practices and methods and ensuring that essential requirements are included in the design, procurement, and fabrication of GSE used to support the operations of receiving, storage, transportation, handling, assembly, inspection, test, checkout, service, launch, and recovery of space vehicles and payloads at NASA's launch, landing, or retrieval locations. GSE must also meet the requirements for the location of its intended use (e.g. AFSPCMAN 91-710, Range Safety User Requirements Manual, for the Eastern and Western Test Ranges).
b. This Standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This Standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements only to the extent specified or referenced in their contracts, grants, or agreements.
c. Requirements are numbered and indicated by the word "shall." Explanatory or guidance text is indicated in italics beginning in section 4.
d. Programs, projects, and elements are responsible for flowing requirements down to contractors, subcontractors, and suppliers of components at the lowest level.
e. Programs, in conjunction with Engineering and Safety and Mission Assurance (S&MA) organizations, have the responsibility to do the following:
(1) Determine categories or types of GSE based on risk and any additional requirements resulting from these categories or types.
The purpose of this Standard is to establish requirements and guidance for design and fabrication of ground support equipment (GSE) to assist National Aeronautics and Space Administration (NASA) space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE.
Applicability
a. This Standard is applicable to NASA space flight programs and its use is at the discretion of each program. This Standard establishes a set of GSE design requirements for NASA programs and projects. This Standard is intended for use in establishing uniform engineering practices and methods and ensuring that essential requirements are included in the design, procurement, and fabrication of GSE used to support the operations of receiving, storage, transportation, handling, assembly, inspection, test, checkout, service, launch, and recovery of space vehicles and payloads at NASA's launch, landing, or retrieval locations. GSE must also meet the requirements for the location of its intended use (e.g. AFSPCMAN 91-710, Range Safety User Requirements Manual, for the Eastern and Western Test Ranges).
b. This Standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This Standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements only to the extent specified or referenced in their contracts, grants, or agreements.
c. Requirements are numbered and indicated by the word "shall." Explanatory or guidance text is indicated in italics beginning in section 4.
d. Programs, projects, and elements are responsible for flowing requirements down to contractors, subcontractors, and suppliers of components at the lowest level.
e. Programs, in conjunction with Engineering and Safety and Mission Assurance (S&MA) organizations, have the responsibility to do the following:
(1) Determine categories or types of GSE based on risk and any additional requirements resulting from these categories or types.
-
Statistics
NASA-STD-5005 REV D
Show full item record
| contributor author | NASA - National Aeronautics and Space Administration (NASA) | |
| date accessioned | 2017-09-04T16:45:25Z | |
| date available | 2017-09-04T16:45:25Z | |
| date copyright | 06/14/2013 | |
| date issued | 2013 | |
| identifier other | BTBDFFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/108701 | |
| description abstract | Purpose The purpose of this Standard is to establish requirements and guidance for design and fabrication of ground support equipment (GSE) to assist National Aeronautics and Space Administration (NASA) space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE. Applicability a. This Standard is applicable to NASA space flight programs and its use is at the discretion of each program. This Standard establishes a set of GSE design requirements for NASA programs and projects. This Standard is intended for use in establishing uniform engineering practices and methods and ensuring that essential requirements are included in the design, procurement, and fabrication of GSE used to support the operations of receiving, storage, transportation, handling, assembly, inspection, test, checkout, service, launch, and recovery of space vehicles and payloads at NASA's launch, landing, or retrieval locations. GSE must also meet the requirements for the location of its intended use (e.g. AFSPCMAN 91-710, Range Safety User Requirements Manual, for the Eastern and Western Test Ranges). b. This Standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This Standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements only to the extent specified or referenced in their contracts, grants, or agreements. c. Requirements are numbered and indicated by the word "shall." Explanatory or guidance text is indicated in italics beginning in section 4. d. Programs, projects, and elements are responsible for flowing requirements down to contractors, subcontractors, and suppliers of components at the lowest level. e. Programs, in conjunction with Engineering and Safety and Mission Assurance (S&MA) organizations, have the responsibility to do the following: (1) Determine categories or types of GSE based on risk and any additional requirements resulting from these categories or types. | |
| language | English | |
| title | NASA-STD-5005 REV D | num |
| title | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT | en |
| type | standard | |
| page | 76 | |
| status | Active | |
| tree | NASA - National Aeronautics and Space Administration (NASA):;2013 | |
| contenttype | fulltext |