درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1001-1020 of 2524
-
AASHTO HM-32 PT I
Abstract: INTRODUCTION
This Thirty-Second Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials, and Part II includes methods of testing and specifications ... -
AASHTO M 232M/M 232
Abstract: This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. The hot-dip galvanizing process consists of parts being immersed in molten zinc for a time sufficient to allow a metallurgical ...Subject(s) : Coatings , zinc , galvanized coatings , steel hardware , zinc coated , steel products , metallic coated , zinc coatings , steel products , -
AASHTO M 288
Abstract: This is a materials specification covering geotextile fabrics for use in subsurface drainage; separation; stabilization; erosion control; temporary silt fence; and paving fabrics. This is a material purchasing specification ... -
AASHTO T 330
Abstract: The purpose of this standard is to identify the presence of harmful clays of the smectite group (poor minus 75-μm material) and to provide an indication of the surface activity of the aggregate.
This standard ... -
AASHTO M 167M/M 167
Abstract: This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory ... -
AASHTO T 335
Abstract: This test method covers the determination of the percentage, by mass, of a coarse aggregate sample that consists of fractured particles meeting specified requirements.
This standard may involve hazardous materials, ... -
AASHTO M 45
Abstract: This specification covers aggregate for use in masonry mortar.
The values stated in SI units are to be regarded as the standard. -
AASHTO HB-17 DIVISION II SEC 22
Abstract: Description
This work shall consist of the construction of bank and slope protection courses in accordance with these Specifications and in reasonably close conformity with the lines, grades, and ... -
AASHTO TP 85
Abstract: This test method outlines the procedure for measuring the apparent viscosity of hot-poured bituminous crack sealant at elevated temperature from 150° to 200°C using a rotational viscometer.
The rotational ...