Now showing items 1081-1100 of 2524

    • AASHTO DIVISION II 17.2 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO DIVISION II 30.6 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO DIVISION I SEC 3-A 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO M 251 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2011
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This specification covers the material requirements for plain and laminated elastomeric bridge bearings. Elastomeric bearings furnished under this specification shall adequately provide for thermal expansion and contraction, ...
    • AASHTO DIVISION I 9.5 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO T 360 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2016
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This test method describes the procedures for measuring tire/pavement noise using the on-board sound intensity (OBSI) method and the procedures for verification of the measurement system. The test method provides an objective ...
    • AASHTO M 92 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2015
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO DIVISION II 19.2 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO DIVISION II 15.3 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO M 198 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2010
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This specification covers joints for precast concrete pipe and box, and other sections using preformed flexible joint sealants for use in storm sewers and culverts which are not intended to operate under internal pressure, ...
      Subject(s) : concrete manholes , concrete pipe , flexible , joints , sealants ,
    • AASHTO M 201 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2011
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This specification includes requirements for mixing rooms where paste and mortar specimens are prepared; and for moist cabinets, moist rooms, and water storage tanks where paste, mortar, and concrete test specimens are ...
      Subject(s) : Cement paste , concrete , mixing rooms , moist cabinets , moist rooms , mortar , water storage tanks ,
    • AASHTO SRPG 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2016
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: Objective
      The primary objective of Best Practices, Volume 2 is to identify best practices from a broad body of recently completed state rail planning work to empower future planners with ideas and ...
    • AASHTO TP36 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO T 304 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2015
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This method describes the determination of the loose uncompacted void content of a sample of fine aggregate. When measured on any aggregate of a known grading, void content provides an indication of that aggregate's ...
    • AASHTO HB-17 DIVISION I SEC 1 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2002
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO T 326 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2013
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This method describes the determination of the loose uncompacted void content of a sample of coarse aggregate. When measured on any aggregate of a known grading, void content provides an indication of the aggregate's ...
    • AASHTO DIVISION I-A 2.1 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO T 290 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;2012
      Organization : AASHTO - American Association of State Highway and Transportation Officials
      Abstract: This test method covers the determination of the water-soluble sulfate ion content in soil. This standard is divided into two parts. The first part specifies the procedure for sampling and preparing the sample to size for ...
    • AASHTO TP9 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials
    • AASHTO DIVISION II 12.7 

      Type: standard
      Source: AASHTO - American Association of State Highway and Transportation Officials:;1996
      Organization : AASHTO - American Association of State Highway and Transportation Officials