درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1301-1320 of 2524
-
AASHTO T 132
Abstract: This method covers determination of the tensile strength of hydraulic cement mortars employing the briquet specimen. It is primarily for use by those interested in research on methods for determining tensile strength of ... -
AASHTO R 30
Abstract: This practice describes procedures for mixture conditioning of compacted and uncompacted hotmix asphalt (HMA). Three types of conditioning are described: (1) mixture conditioning for volumetric mixture design; (2) short-term ...Subject(s) : Conditioning , hot mix asphalt , long-term conditioning , short-term conditioning , -
AASHTO R 67
Abstract: This method describes the process for removal of a core sample of compacted asphalt mixture from a pavement for laboratory testing. Cores may range in diameter from 2 in. to 12 in.
This standard does not purport ... -
AASHTO PP 70
Abstract: This practice outlines a method for collecting pavement transverse profile, including its relationship to a level horizontal reference in pavement surfaces utilizing automated measurement devices. The profile can subsequently ...Subject(s) : Automated pavement data collection , pavement cross-slope , pavement distress , pavement edge drop-off , pavement evaluation , pavement management , pavement monitoring , pavement surface , pavement transverse profile , rut , rutting , -
AASHTO PP 49
Abstract: This practice describes minimum performance requirements for inertial profilers to be used for quality control/quality assurance (QC/QA) of surface smoothness on Owner-Agency paving projects where the profile-based smoothness ... -
AASHTO M 176M/M 176
Abstract: This specification covers porous nonreinforced concrete pipe for use in underdrains.
This specification is applicable for orders in either SI units (M 176M) or in inch-pound units (M 176). SI units and inch-pound units ... -
AASHTO R 53
Abstract: This recommended practice shall apply to all producing mills that supply deformed and plain steel reinforcement bars, welded wire, or wire for use on State Transportation Agency projects.
The initial qualification and ... -
AASHTO T 298
Abstract: This test method covers the procedure for testing vertical or batter piles individually to determine the force and velocity response of the pile to an impact force applied axially by a pile-driving hammer to the top of the ... -
AASHTO M 302
Abstract: This specification covers slag cement for use as a cementitious material in concrete and mortar.
The values stated in SI units are to be regarded as standard. The values given in parentheses are given for information ...