درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1341-1360 of 2524
-
AASHTO T 230
Abstract: This method describes the procedures for determining the degree of pavement compaction of a bituminous-aggregate mixture as related to standard specimens composed of the same materials and within the tolerance of the job ... -
AASHTO COMMENTARIES
Abstract: INTRODUCTION
Note: The 16th Edition of Standard Specifications of Highway Bridges includes a Commentary to offer further explanation of the revisions provided in 1996. -
AASHTO M 31M/M 31
Abstract: This specification covers deformed and plain carbon steel concrete reinforcement bars in cut lengths or coils. Steel bars containing alloy additions, such as with the AISI and SAE series of alloy steels, are permitted if ...Subject(s) : Concrete reinforcement , deformations (protrusions) , steel bars , -
AASHTO TP 89
Abstract: The direct adhesion test is used to determine the adhesion strength of hot-poured crack sealant at the application temperatures.
The adhesion test is a test of fracture. The object of the test is to apply tensile forces ... -
AASHTO T 198
Abstract: This test method covers the determination of the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores.
Note 1—For methods of molding cylindrical ... -
AASHTO T 244
Abstract: These test methods cover procedures and definitions for the mechanical testing of steel, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the ... -
AASHTO M 245
Abstract: This specification covers polymer-precoated corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally ... -
AASHTO T 349
Abstract: This test method covers the determination of filling capacity of self-consolidating concrete (SCC).
The test method is limited to SCC having a nominal maximum size coarse aggregate up to 1 in. (25 mm). This test method ... -
AASHTO MEBC-1
Abstract: Introduction
This manual was developed for use in designing and constructing chip seals over hot mix asphalt pavements. It documents best practices based on the findings of research during NCHRP Project ... -
AASHTO LRFDUS
Abstract: SCOPE OF THE SPECIFICATIONS
The provisions of these Specifications are intended for the design, evaluation, and rehabilitation of both fixed and movable highway bridges. Mechanical, electrical, and ...