درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1381-1400 of 2524
-
AASHTO HB-17 DIVISION II SEC 11
Abstract: Description: This work shall consist of furnishing, fabricating, and erecting steel structures and structural steel portions of other structures in accordance with these Specifications, the Special Provisions and the details ... -
AASHTO PBHP
Abstract: Introduction: State Departments of Transportation (DOT) use performance management for a variety of functions from statewide budgeting and resource allocation to asset and systems management and executive dashboards.
The ... -
AASHTO LRFDLTS
Abstract: The provisions of these load and resistance factor design specifications for structural supports for highway signs, luminaires, and traffic signals, hereinafter referred to as the Specifications, are applicable to the ... -
AASHTO TP 100
Abstract: This test method describes procedures for testing vertical or inclined deep foundation elements to determine their behavior characteristics in response to an internally applied axial static load. This method is applicable ... -
AASHTO M 169
Abstract: This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, for machining into components, or for ...Subject(s) : Alloy steel , carbon steel bars , cold-finished , steel bars , -
AASHTO M294M
Abstract: This specification covers the requirements and methods of tests for corrugated polyethylene (PE) pipe, couplings, and fittings for use in surface and subsurface drainage applications.
Nominal sizes of 300 to 1200 mm ... -
AASHTO M 318
Abstract: This specification covers processed glass cullet intended for use as a granular road base material. When properly processed and mixed with natural or crushed aggregate, hauled to and properly spread and compacted on a ... -
AASHTO R 32
Abstract: This standard practice covers the annual calibration of the load cell and the deflection sensors and monthly relative calibration of the deflection sensors of a falling weight deflectometer (FWD) or a heavy weight deflectometer ... -
AASHTO MP 13M/MP 13
Abstract: This specification covers the stainless steel clad concrete reinforcement bars in cut lengths or coils, deformed and plain round. The standard sizes and dimensions of deformed bars and their number designations shall be ...Subject(s) : Concrete reinforcement , deformations (protrusions) , steel bars , -
AASHTO T 134
Abstract: These methods of test are intended for determining the relation between moisture content and density of soil-cement mixtures when compacted before cement hydration as prescribed.
A 944-cm3 (1/30-ft3) ... -
AASHTO R 12
Abstract: This recommended practice is to provide guidance in the use and application of the Marshall and Hveem Methods of mixture design.