درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1701-1720 of 2524
-
AASHTO PP 64
Abstract: This standard covers the determination of aggregate source and source blend shape characteristics using gradation analysis and shape properties determined by means of digital image analysis.
This standard may involve ... -
AASHTO PP 70
Abstract: This practice outlines a method for collecting pavement transverse profile, including its relationship to a level horizontal reference in pavement surfaces utilizing automated measurement devices. The profile can subsequently ... -
AASHTO T 316
Abstract: This test method outlines the procedure for measuring the viscosity of asphalt binders at elevated temperature from 60 to over 200°C using a Rotational Viscometer apparatus as specified by M 320 and R 29.
This ... -
AASHTO PP 57
Abstract: This document contains general criteria and guidelines for establishing requirements for and performing equipment calibrations, verification of calibrations, standardizations, and checks. -
AASHTO APD
Abstract: Foreword: Our job as state transportation leaders is to maintain and enhance the transportation system Americans use every day. The world we live in and the demands we face are changing very rapidly. There are areas ... -
AASHTO PP2
Abstract: This practice describes procedures for mixture conditioning of compacted and uncompacted hot-mix asphalt (HMA). Three types of conditioning are described: 1) mixture conditioning for volumetric mixture design; 2) short-term ... -
AASHTO T 291
Abstract: This test method describes the procedures for sampling and testing a soil for chloride ion content. This standard is divided into two parts. The first part specifies the procedure for sampling and preparing the sample to ... -
AASHTO T 162
Abstract: This method covers the mechanical mixing of hydraulic cement pastes and mortars of plastic consistency.
The values stated in SI units are to be regarded as the standard.
This standard does not purport to address ... -
AASHTO M 206M/M 206
Abstract: This specification covers reinforced arch-shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts.
This specification is applicable for orders ... -
AASHTO T 329
Abstract: This method is intended for the determination of moisture content of asphalt mixtures by drying in an oven.
The values stated in SI units are to be regarded as the standard.
This standard may involve hazardous ... -
AASHTO T 258
Abstract: This standard covers a method to determine if a soil is expansive and methods to predict the amount of swell.
Note 1-Methods that are being used by various agencies to control the amount of swell are ... -
AASHTO T 326
Abstract: This method describes the determination of the loose uncompacted void content of a sample of coarse aggregate. When measured on any aggregate of a known grading, void content provides an indication of the aggregate's ...Subject(s) : Angularity , coarse aggregate , particle shape , surface texture , void content , -
AASHTO T 280
Abstract: These test methods cover testing of concrete pipe, manhole sections, and tile. The test methods described are used in production testing and acceptance testing to evaluate the properties provided for in the specifications. ...