درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1821-1840 of 2524
-
AASHTO HB-17 DIVISION II SEC 10
Abstract: Description: This work shall consist of prestressing precast or cast-in-place concrete by furnishing, placing, and tensioning of prestressing steel in accordance with details shown on the plans, and as specified in these ... -
AASHTO M 224
Abstract: This guide includes the selection factors for and use of protective sealers for highway purposes to be applied to hardened concrete for the purpose of protecting new concrete or prolonging the life of sound, in-service ... -
AASHTO R 10
Abstract: This standard practice is to provide standard definitions for terms used in specifications, test methods, and the various quality assurance procedures. -
AASHTO ATG
Abstract: Preface
The 2009 AASHTO Transportation Glossary is an update and revision of the 1983 Transportation Glossary and the 1998 Transportation Glossary, which was unpublished. The greatest number of additions in ... -
AASHTO HB-17 DIVISION I SEC 5
Abstract: GENERAL
Retaining walls shall be designed to withstand lateral earth and water pressures, including any live and dead load surcharge, the self weight of the wall, temperature and shrinkage effects, and ... -
AASHTO R 64
Abstract: This practice covers field sampling and fabrication and initial curing of 50-mm (2-in.) cube specimens of nonshrink grout or mortar materials, or both.
The values stated in either inch-pound or SI units shall be regarded ... -
AASHTO PP 68
Abstract: This practice outlines the procedures for collecting images of pavement surfaces utilizing automated methods for the purpose of distress detection for both network- and project-level analysis. Detailed specifications are ...Subject(s) : Asphalt pavement surface , automated data collection , pavement distress , pavement images , pavement management , -
AASHTO MP 17
Abstract: This example specification is intended for Owner-Agencies to use in development of specific language when requiring the measurement and evaluation of ride quality and compliance using inertial profiling systems.
This ... -
AASHTO M 208
Abstract: This specification covers seven grades of cationic emulsified asphalt for use in pavement construction in the manner designated.
Note 1—See M 140 for emulsions other than cationic.
The values ... -
AASHTO MP 9
Abstract: This specification covers compost produced from various organic by-products for use as a filter berm media for erosion/sediment control. The technique described in this specification is primarily used for temporary ... -
AASHTO GSEC
Abstract: The methodology is presented in a general format utilizing load and resistance factors. This procedure allows for combining probability theory, statistical data and engineering judgment into a rational decision making tool. ... -
AASHTO GD-2
Abstract: Introduction
The art of modern road building is the result of gradual development to meet changing traffic needs and broadened knowledge gained through experience and research. In geometric design—design ... -
AASHTO R 40
Abstract: The rod and level can be used to accurately measure the profile of a pavement. The profile data can be used to evaluate the roughness of the pavement by computing a roughness index such as international roughness index ...Subject(s) : Longitudinal profile , pavement profile , rod and level , -
AASHTO T 287
Abstract: This procedure covers the quantitative determination of the asphalt binder content of asphalt mixtures by testing a sample with a nuclear gauge that utilizes neutron-thermalization techniques.
The values expressed in ...