درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 1881-1900 of 2524
-
AASHTO R 62
Abstract: This practice describes testing and analysis for developing a dynamic modulus master curve for hot mix asphalt (HMA). This practice is intended for dense- and gap-graded mixtures with nominal-maximum aggregate sizes up to ... -
AASHTO TP 101
Abstract: This test method covers the determination of an asphalt binder's resistance to fatigue damage by means of cyclic loading employing systematic, linearly increasing load amplitudes. The amplitude sweep is conducted using the ... -
AASHTO M 248
Abstract: This specification covers alkyd resin type, ready-mixed white and yellow traffic paints for use on bituminous and portland cement concrete pavements.
Intended use of the traffic paint.
These paints may be reflectorized ... -
AASHTO HB-17 DIVISION II
Abstract: INTRODUCTION: This Division of the Standard Specifications for Highway Bridges includes the basic technical construction specifications needed for the construction of bridges and other major transportation structures. ... -
AASHTO T 51
Abstract: This test method describes the procedure for determining the ductility of a bituminous material measured by the distance to which it will elongate before breaking when two ends of a briquet specimen of the material, of the ...Subject(s) : ductility , ductility mold , ductilometer , -
AASHTO T 105
Abstract: These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification ... -
AASHTO T 289
Abstract: This test method describes procedures and apparatus for determining a pH value for corrosion testing by use of a pH meter.
The principal use of the test is to supplement soil-resistivity measurements and thereby ... -
AASHTO MBE
Abstract: This Manual has been developed to assist Bridge Owners by establishing inspection procedures and evaluation practices that meet the National Bridge Inspection Standards (NBIS). The Manual has been divided into eight Sections, ... -
AASHTO T 339
Abstract: This method is designed for the determination of the isocyanate (NCO) content of the resin system found in polyurethane paints.
The values stated in SI units are to be regarded as the standard.
This standard ... -
AASHTO T 324
Abstract: This test method describes a procedure for testing the rutting and moisture-susceptibility of hot mix asphalt (HMA) pavement samples in the Hamburg Wheel-Tracking Device.
The method describes the testing of submerged, ...Subject(s) : Compacted hot mix asphalt , moisture-susceptibility , rutting , wheel-track testing , -
AASHTO PMG
Abstract: The American Association of State Highway and Transportation Officials (AASHTO) has supported the development and use of pavement management since the early 1980s. In 1990, AASHTO published the AASHTO Guidelines for ... -
AASHTO M 157
Abstract: This specification covers ready-mixed concrete manufactured and delivered to a purchaser in a freshly mixed and unhardened state as hereinafter specified. Requirements for quality of concrete shall be either as hereinafter ...