درباره ما
AASHTO - American Association of State Highway and Transportation Officials: Recent submissions
Now showing items 2161-2180 of 2524
-
AASHTO LRFDFRP
Abstract: These Specifications present provisions for the analysis and design of concrete-filled fiber-reinforced polymer (FRP) tubes (CFFT) for use as structural components in bridges. Design methodology presented in this specification ... -
AASHTO T 202
Abstract: This test method covers procedures for the determination of viscosity of asphalt binder (bitumen) by vacuum capillary viscometers at 60°C (140°F). It is applicable to materials having viscosities in the range ...Subject(s) : asphalt , capillary , vacuum , viscometer , viscosity , -
AASHTO M 330
Abstract: This specification covers the requirements and methods of tests for corrugated polypropylene (PP) pipe, couplings, and fittings for use in surface and subsurface drainage application.
Nominal sizes of 300 to 1500 mm ... -
AASHTO MP 22
Abstract: This specification covers the requirements for fiber-reinforced polymeric composite material systems intended for use in bridge and highway structures. -
AASHTO T 201
Abstract: This test method covers procedures for the determination of kinematic viscosity of liquid asphalts (bitumens), road oils and distillation residues of liquid asphalts (bitumens) all at 60°C (140°F) and of asphalt ...Subject(s) : asphalt , capillary , kinematic , viscometer , viscosity , -
AASHTO TP 85
Abstract: This test method outlines the procedure for measuring the apparent viscosity of hot-poured bituminous crack sealant at elevated temperature from 150° to 200°C using a rotational viscometer.
The rotational ... -
AASHTO T 180
Abstract: This method of test is intended for determining the relationship between the moisture content and density of soils when compacted in a given mold of a given size with a 4.54-kg (10-lb) rammer dropped from a height of 457 ... -
AASHTO T 113
Abstract: This method covers the determination of the percentage of lightweight pieces in aggregate by means of sink-float separation in a heavy liquid of suitable specific gravity.
The values stated in SI units are to be regarded ... -
AASHTO HB-17 DIVISION II SEC 6
Abstract: DESCRIPTION: This work shall consist of designing, furnishing, installing, testing, and stressing permanent cement-grouted ground anchors in accordance with the plans, these specifications, and the special provisions. -
AASHTO HB-17 DIVISION II SEC 18
Abstract: This section covers the construction and installation of structural bearings that consist of one or more of the following component types: metal rocker and roller bearings, PTFE sliding bearings (flat and curved), plain ... -
AASHTO TP 81
Abstract: This standard covers the measurement of aggregate shape properties using the Digital Image Analysis techniques.
This standard may involve hazardous materials, operations, and equipment. This standard does not purport ... -
AASHTO R 34
Abstract: This practice includes a set of test procedures for the evaluation of deicing chemicals.
This procedure may involve hazardous materials, operations, and equipment. It does not purport to address all of the safety ...