Abstract: Request PDF

Abstract: The features, conventions, characteristics and attributes identified in this guide are those of magnetic contactors and thermal overload relays. These are components which may be used alone, or combined with other components, ...

Abstract: This standard covers the following roadway and area lighting equipment, which may be physically and electrically interchanged to operate within established values:
a) Locking-type photocontrol, herein referred to as ...

Abstract: This part of IEC 61131, which is a technical report, applies to the programming of programmable controller systems using the programming languages defined in IEC 61131-3. It also provides guidelines for the implementation ...

Abstract: This standard covers the requirements for electrical rigid steel conduit for use as a raceway for wires or cables of an electrical system. Finished conduit is produced in nominal 10 ft (3.05 m) lengths, threaded on each ...

Abstract: This standard comprises a manual of test methods to be followed in making tests to determine the characteristics of composite electrical power insulators, as defined herein.

Abstract: This technical report establishes names and mathematical definitions for the Volt-Ampere (VA), Volt-Ampere hours (VAh), Volt-Amperes Reactive (VAR), and Volt-Ampere Reactive hours (VARh) formulae used by poly-phase electricity ...

Abstract: This standard describes the physical and electrical requirements of the principal types of singleended low pressure sodium lamps. The electrical data provides the specific basis for ballast requirements for these lamps.

Abstract: This standards publication defines test methods for measuring the signal-to-noise ratio and image uniformity of MR images produced using receive-only phased array coils. Other coil configurations have been addressed in MS ...