SMD-5962-95605
MICROCIRCUIT, LINEAR, 28 VOLT, SOLID STATE POWER CONTROLLER, HYBRID
Organization:
DLA - CC - DLA Land and Maritime
Year: 1995
Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). This drawing describes device requirements for hybrid microcircuits to be processed in accordance with MIL-H-38534. Two product assurance classes, military high reliability (device class H) and space application (device class K) and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.
The PIN shall be as shown in the following example:
Device classes H and K RHA marked devices shall meet the MIL-H-38534 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
This device class designator shall be a single letter identifying the product assurance level as follows:
The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes.
The PIN shall be as shown in the following example:
Device classes H and K RHA marked devices shall meet the MIL-H-38534 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
Device type Generic number Circuit function Rating 01 RP-21002D0 28 V dc, solid state power controller 2 Amps 02 RP-21005D0 28 V dc, solid state power control[er 5 Amps 03 RP-21007D0 28 V dc, solid state power controller 7 Amps 04 RP-21010D0 28 V dc, solid state power controller 10 Amps 05 RP-21015D0 28 V dc, solid state power controller 15 Amps 06 RP-21020D0 28 V dc, solid state power controller 20 Amps 07 RP-21025D0 28 V dc, solid state power controller 25 Amps
This device class designator shall be a single letter identifying the product assurance level as follows:
Device class Device requirements documentation H or K Certification and qualification to MIL-H-38534
The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style X See figure 1 10 Flange package
The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Power input to power ground ................ 50 V dc continuous (100 V, 50 ms transient) Control input to signal ground ............. VBIAS + 0.5 V Power ground to signal ground .............. −100 V dc to +100 V dc VBIAS ...................................... −0.5 V dc to +7.0 V dc Pin to case ................................ −1000 V dc to +1000 V dc Storage temperature range .................. −65°C to +150°C Lead temperature (soldering) ............... +300°C Junction temperature (TJ) .................. +150°C
Power input to power ground ................ +9.0V dc to +40.0 Vdc Control input to signal ground ............. 0 V to VBIAS Power ground to signal ground .............. −40 V dc to +40 V dc VBIAS ...................................... +4.5 V dc to +5.5 V dc Case operating temperature range (TC) ...... −55°C to +125°C
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes.
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:47:26Z | |
| date available | 2017-09-04T16:47:26Z | |
| date copyright | 09/14/1995 | |
| date issued | 1995 | |
| identifier other | WFFZDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/110805 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). This drawing describes device requirements for hybrid microcircuits to be processed in accordance with MIL-H-38534. Two product assurance classes, military high reliability (device class H) and space application (device class K) and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN. The PIN shall be as shown in the following example: Device classes H and K RHA marked devices shall meet the MIL-H-38534 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function Rating 01 RP-21002D0 28 V dc, solid state power controller 2 Amps 02 RP-21005D0 28 V dc, solid state power control[er 5 Amps 03 RP-21007D0 28 V dc, solid state power controller 7 Amps 04 RP-21010D0 28 V dc, solid state power controller 10 Amps 05 RP-21015D0 28 V dc, solid state power controller 15 Amps 06 RP-21020D0 28 V dc, solid state power controller 20 Amps 07 RP-21025D0 28 V dc, solid state power controller 25 Amps This device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation H or K Certification and qualification to MIL-H-38534 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X See figure 1 10 Flange package The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Power input to power ground ................ 50 V dc continuous (100 V, 50 ms transient) Control input to signal ground ............. VBIAS + 0.5 V Power ground to signal ground .............. −100 V dc to +100 V dc VBIAS ...................................... −0.5 V dc to +7.0 V dc Pin to case ................................ −1000 V dc to +1000 V dc Storage temperature range .................. −65°C to +150°C Lead temperature (soldering) ............... +300°C Junction temperature (TJ) .................. +150°C Power input to power ground ................ +9.0V dc to +40.0 Vdc Control input to signal ground ............. 0 V to VBIAS Power ground to signal ground .............. −40 V dc to +40 V dc VBIAS ...................................... +4.5 V dc to +5.5 V dc Case operating temperature range (TC) ...... −55°C to +125°C Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. | |
| language | English | |
| title | SMD-5962-95605 | num |
| title | MICROCIRCUIT, LINEAR, 28 VOLT, SOLID STATE POWER CONTROLLER, HYBRID | en |
| type | standard | |
| page | 14 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1995 | |
| contenttype | fulltext |

درباره ما