درباره ما
IEEE C135.64
Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps
Year: 2012
Abstract: This guide defines testing procedures for the slip and pull-out strength testing of bolted dead end strain clamps for use on transmission and distribution lines. This guide covers initial certification testing. For routine acceptance testing, refer to IEEE Std C135.61TM.1
Purpose
The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.
1 Information on references can be found in Clause 2.
Purpose
The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.
1 Information on references can be found in Clause 2.
Show full item record
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T16:48:51Z | |
| date available | 2017-09-04T16:48:51Z | |
| date copyright | 05/14/2012 | |
| date issued | 2012 | |
| identifier other | WJMTXEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/112372 | |
| description abstract | This guide defines testing procedures for the slip and pull-out strength testing of bolted dead end strain clamps for use on transmission and distribution lines. This guide covers initial certification testing. For routine acceptance testing, refer to IEEE Std C135.61TM.1 Purpose The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations. 1 Information on references can be found in Clause 2. | |
| language | English | |
| title | IEEE C135.64 | num |
| title | Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2012 | |
| contenttype | fulltext |