درباره ما
MIL-S-24235/18A
STUFFING TUBES, METAL, AND PACKING ASSEMBLIES FOR ELECTRIC CABLES, SWAGE TYPE, REDUCED DIAMETER, STEEL AND ALUMINUM, FOR DECK AND BULKHEADS WITH PIPE PROTECTION
Year: 1992
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-S-24235. Intended Use: The stuffing tubes are for electric cable penetrations of surface ships deck and bulkheads where pipe protection is required (see DOD-STD-2003). Alternate to stuffing tubes, MIL-S-24235/9 and MIL-S-24235/17. 6. Wall thickness (after swaging and threading) shall be at least 0.062 inch.![TABLE VI. Parts list.]()
![TABLE VI. Parts list.]()
Revision letters are not used to denote changes due to the extensiveness of the changes.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-S-24235. Intended Use: The stuffing tubes are for electric cable penetrations of surface ships deck and bulkheads where pipe protection is required (see DOD-STD-2003). Alternate to stuffing tubes, MIL-S-24235/9 and MIL-S-24235/17. 6. Wall thickness (after swaging and threading) shall be at least 0.062 inch.
Collections
: