درباره ما
SAE - SAE International: Recent submissions
Now showing items 861-880 of 16264
-
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification
Abstract: See Table 1. DAx fluids are mineral oil based, DPx fluids are polyalphaolefin based, and DEx are ester based. -
Truck and Bus Lane Departure Warning Systems Test Procedure and Minimum Performance Requirements
Abstract: This SAE Recommended Practice establishes a uniform, powered vehicle test procedure and minimum performance requirement for lane departure warning systems used in highway trucks and buses greater than 4546 kg (10000 pounds) ... -
Data Link Layer
Abstract: The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road, as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of ... -
15 Pole Connector Between Towing Vehicles and Trailers with 12 Volt Nominal Supply
Abstract: This SAE standard establishes the minimum construction and performance requirements for a 15 Pole Connector Between Towing Vehicles and Trailers, for trucks, trailers, and dollies in conjunction with SAE J2742. The connector ... -
Electromagnetic Testing by Eddy Current Methods
Abstract: The purpose of this SAE Information Report is to provide general information relative to the nature and use of eddy current techniques for nondestructive testing. The document is not intended to provide detailed technical ... -
Automotive Steel Castings
Abstract: This SAE Standard defines the specifications for steel castings used in the automotive and allied industries. -
Dynamic Cushioning Performance Criteria for Snowmobile Seats
Abstract: This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The ... -
Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods)
Abstract: This SAE recommended practice specifies a standard geometry leak channel to set the leak threshold and compare results from a variety of leak test technologies and test conditions. This practice applies to fuel system ... -
Penetrating Radiation Inspection
Abstract: The purpose of this SAE Information Report is to provide basic information on penetrating radiation, as applied in the field of nondestructive testing, and to supply the user with sufficient information so that he may ... -
Acoustic Emission Test Methods
Abstract: The scope of this SAE Information Report is to supply the user with sufficient information so that he may decide whether acoustic emission test methods apply to his particular inspection problem. Detailed technical information ... -
Cast Copper Alloys
Abstract: This standard prescribes the chemical and mechanical requirements for a wide range of copper base casting alloys used in the automotive industry. It is not intended to cover ingot. (ASTM B30 is suggested for this purpose.) -
Automotive Austempered Ductile (Nodular) Iron Castings (ADI)
Abstract: This SAE Standard covers the mechanical and physical property requirements for Austempered Ductile Iron (ADI) castings used in automotive and allied industries. Specifically covered are:aHardnessbTensile StrengthcYield ... -
Ultrasonic Inspection
Abstract: The scope of this SAE Information report is to provide basic information on ultrasonics, as applied in the field of nondestructive inspection. References to detailed information are listed in Section 2. -
Chemical Compositions of SAE Wrought Stainless Steels
Abstract: The chemical composition of standard types of wrought stainless steels are listed in ASTM Specification A240. The UNS 20000 series designates nickel-chromium manganese, corrosion resistant types that are nonhardenable by ... -
Characterization, Conducted Immunity
Abstract: The methods included in this document are:aVoltage-Temperature Design Margins.bVoltage Interruptions and Transients.cVoltage Dropouts and Dips.dCurrent Draw Under a Number of Conditions.eSwitch Input NoiseThese methods are ... -
Sound Level Determination for Snowmobiles under Typical Trail Operating Conditions
Abstract: This SAE Recommended Practice establishes the method to determine Sound Level of a snowmobile under typical trail operating conditions.Snowmobiles have different engine power levels that depends on the model. -
Cleanliness Rating of Steels by the Magnetic Particle Method
Abstract: This SAE Recommended Practice provides a rating procedure for the cleanliness rating of steels by the magnetic particle method. The procedure is based on counting the number of indications (frequency) and employs a weighted ... -
Guidelines for Usage of Stainless Steel and Bimetal for Exterior Automotive Bright Trim
Abstract: The scope of this SAE Recommended Practice is to give guidelines for design, processing, and material selection for stainless steel and bimetal exterior automotive moldings. -
Glossary of Terms Related to Fluid Filters and Filter Testing
Abstract: Over the years during which fluid filtration systems have been developing, many terms have come into use for descriptions of characteristics of filter media, filter assemblies, test methods, and test materials. Inevitably, ...