MIL-PRF-39002C
RESISTORS, VARIABLE, WIREWOUND, SEMI-PRECISION, GENERAL SPECIFICATION FOR
Organization:
DLA - CC - DLA Land and Maritime
Year: 2010
Abstract: This specification covers the general requirements for semi-precision, wirewound, variable, resistors having a resistance element of wire, wound on an arc shaped insulated form, so that a contact bears uniformly on the resistance element, when adjusted by a contact shaft. The electrical output (in terms of percent of applied voltage) is linear with respect to the angular position of the contact arm. These resistors are capable of full-load operation (when the maximum resistance is engaged) at a maximum ambient temperature of 85OC, and are suitable for continuous operation, when properly derated, at a maximum temperature of 135OC. These resistors have a tolerance of ±5 percent.Intended Use: The resistors covered by this specification are military unique due to the fact that these devices must be able to operate satisfactorily in military systems under the following demanding conditions: 20 G's of high frequency vibration, 100 G's of shock (specified pulse), thermal shock (with no more than 1 percent deviation in initial resistance), low temperature coefficient of resistance, and salt corrosion. In addition, these military requirements are verified under a qualification system. Commercial components are not designed to withstand these military environmental conditions.
Subject: Angular position
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:53:49Z | |
| date available | 2017-09-04T16:53:49Z | |
| date copyright | 08/24/2010 | |
| date issued | 2010 | |
| identifier other | WWTEYCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/117262 | |
| description abstract | This specification covers the general requirements for semi-precision, wirewound, variable, resistors having a resistance element of wire, wound on an arc shaped insulated form, so that a contact bears uniformly on the resistance element, when adjusted by a contact shaft. The electrical output (in terms of percent of applied voltage) is linear with respect to the angular position of the contact arm. These resistors are capable of full-load operation (when the maximum resistance is engaged) at a maximum ambient temperature of 85OC, and are suitable for continuous operation, when properly derated, at a maximum temperature of 135OC. These resistors have a tolerance of ±5 percent.Intended Use: The resistors covered by this specification are military unique due to the fact that these devices must be able to operate satisfactorily in military systems under the following demanding conditions: 20 G's of high frequency vibration, 100 G's of shock (specified pulse), thermal shock (with no more than 1 percent deviation in initial resistance), low temperature coefficient of resistance, and salt corrosion. In addition, these military requirements are verified under a qualification system. Commercial components are not designed to withstand these military environmental conditions. | |
| language | English | |
| title | MIL-PRF-39002C | num |
| title | RESISTORS, VARIABLE, WIREWOUND, SEMI-PRECISION, GENERAL SPECIFICATION FOR | en |
| type | standard | |
| page | 26 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;2010 | |
| contenttype | fulltext | |
| subject keywords | Angular position | |
| subject keywords | Contact arm | |
| subject keywords | Contact resistance | |
| subject keywords | Contact shaft | |
| subject keywords | Resistance element | |
| subject keywords | Single turn |

درباره ما