درباره ما
MIL-F-1183J
FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1987
Abstract: This specification covers pipe fittings of cast bronze with at least one end for silver-brazing into steam, air, oil or water piping systems. Intended Use: Type A fittings are intended for general service and specifically for sea water service. Fittings which are provided as type B only (caps, reducing crosses, 45-degree reducing laterals, plugs, threaded reducers, long turn single sweep reducing tees, fittings with integral flanges and certain reducing tee sizes, bend sizes, and one lateral and one socket-to-socket reducer size) should be used for the same general services as type A fittings but should not be used for sea water service. Caps and plugs which are provided as type B only should be used for "no flow" sea water service. Type A or type B fittings are used with MIL-T-16420 copper-nickel pipe, MIL-T-20168 brass pipe, MIL-T-24107 copper pipe or their equivalent commercial pipe standards. Type A or type B fittings are attached to the pipe by the silver-brazing process without exceeding a temperature of 1500 degrees Fahrenheit (°F).
Subject: Bronze
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:53:52Z | |
| date available | 2017-09-04T16:53:52Z | |
| date copyright | 05/05/1987 | |
| date issued | 1987 | |
| identifier other | WWYHDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/117328 | |
| description abstract | This specification covers pipe fittings of cast bronze with at least one end for silver-brazing into steam, air, oil or water piping systems. Intended Use: Type A fittings are intended for general service and specifically for sea water service. Fittings which are provided as type B only (caps, reducing crosses, 45-degree reducing laterals, plugs, threaded reducers, long turn single sweep reducing tees, fittings with integral flanges and certain reducing tee sizes, bend sizes, and one lateral and one socket-to-socket reducer size) should be used for the same general services as type A fittings but should not be used for sea water service. Caps and plugs which are provided as type B only should be used for "no flow" sea water service. Type A or type B fittings are used with MIL-T-16420 copper-nickel pipe, MIL-T-20168 brass pipe, MIL-T-24107 copper pipe or their equivalent commercial pipe standards. Type A or type B fittings are attached to the pipe by the silver-brazing process without exceeding a temperature of 1500 degrees Fahrenheit (°F). | |
| language | English | |
| title | MIL-F-1183J | num |
| title | FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR | en |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987 | |
| contenttype | fulltext | |
| subject keywords | Bronze | |
| subject keywords | cast | |
| subject keywords | Fitting | |
| subject keywords | Silver brazing |