درباره ما
Search
CSV
RISUFC 3-220-06: GROUTING METHODS AND EQUIPMENT
Abstract: PURPOSE AND SCOPE. This manual was prepared to provide guidance in the use of pressure grouting as a means to correct existing or anticipated subsurface problems. Information on procedures, materials, and equipment for use ...
UFC 3-710-01A: CODE 3 DESIGN WITH PARAMETRIC ESTIMATING
Abstract: Purpose.
The purpose of this Technical Instructions (TI) is to provide design policy and technical guidance to the U.S. Army Corps of Engineers (USACE) for Army Military Construction (MILCON) projects when Code 3 design ...
The purpose of this Technical Instructions (TI) is to provide design policy and technical guidance to the U.S. Army Corps of Engineers (USACE) for Army Military Construction (MILCON) projects when Code 3 design ...
UFC 3-340-07AN: HARDNESS VERIFICATION: DESIGNING FACILITIES TO RESIST NUCLEAR WEAPON EFFECTS
Abstract: FOREWORD
The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the ...
The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the ...
UFC 4-721-10 CHANGE 4: NAVY AND MARINE CORPS BACHELOR HOUSING
Abstract: The Navy and Marine Corps will use this UFC. It presents basic design criteria guidance for Navy and Marine Corps Bachelor Housing, and applies to both enlisted and officer quarters, taking into account local program ...
UFC 3-550-03FA: ELECTRICAL POWER SUPPLY AND DISTRIBUTION
Abstract: The design criteria and standards contained within are the minimums acceptable for Department of the Army and Air Force installations for efficiency, economy, durability, maintainability, and reliability of electrical power ...
UFC 4-023-07: DESIGN TO RESIST DIRECT FIRE WEAPONS EFFECTS
Abstract: This document provides guidance for design of new buildings and for retrofits of existing buildings against the effects of direct fire weapons. Direct fire weapons, for the purposes of this UFC, are limited to small arms ...
UFC 3-130-06: CALCULATION METHODS FOR DETERMINATION OF DEPTH OF FREEZE AND THAW IN SOIL: ARTIC AND SUBARCTIC CONSTRUCTION
Abstract: Purpose and scope.
This manual contains criteria and methods for calculating the depths of freeze and thaw insoils,with consideration of the effects of other adjacent materials, for the design of military ...
This manual contains criteria and methods for calculating the depths of freeze and thaw insoils,with consideration of the effects of other adjacent materials, for the design of military ...
UFC 3-250-11: SOIL STABILIZATION FOR PAVEMENTS
Abstract: This manual prescribes the appropriate type or types of additive to be used with different soil types, procedures for determining a design treatment level for each type of additive, and recommended construction practices ...
UFC 3-240-02N: WASTEWATER TREATMENT SYSTEMS AUGMENTING HANDBOOK
Abstract: PURPOSE AND SCOPE.
This UFC is comprised of two sections. Chapter 1 introduces this UFC and provides a listing of references to other Tri-Service documents closely related to the subject. Appendix A ...
This UFC is comprised of two sections. Chapter 1 introduces this UFC and provides a listing of references to other Tri-Service documents closely related to the subject. Appendix A ...
UFC 3-600-01 CHANGE 1: FIRE PROTECTION ENGINEERING FOR FACILITIES
Abstract: This UFC establishes fire protection engineering policy and criteria for Department of Defense (DOD) components. The provisions of this UFC are applicable to all new and existing DOD facilities located on or outside of DOD ...