Show simple item record

MICROCIRCUITS, DIGITAL, FAST, CMOS, DUAL ODD-PARITY GENERATOR/CHECKERS, TTL COMPATIBLE, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T17:00:50Z
date available2017-09-04T17:00:50Z
date copyright04/21/1992
date issued1992
identifier otherXPQWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/124308
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
    Device type       Generic number            Circuit function          01               54FCT480          High-speed, dual 8-bit parity generator/checker, TTL compatible                                            inputs         02               54FCT480A         High-speed, dual 8-bit parity generator/checker, TTL compatible                                            inputs         03               54FCT480B         High-speed, dual 8-bit parity generator/checker, TTL compatible                                            inputs


The device class designator shall be a single letter identifying the product assurance level as follows:
    Device class           Device requirements documentation            M                 Vendor self-certification to the requirements for non-JAN class B                             microcircuits in accordance with 1.2.1 of MIL-STD-883          B or S              Certification and qualification to MIL-M-38510          Q or V              Certification and qualification to MIL-I-38535


For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
    Outline letter                           Case outline           L        D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
    Supply voltage range (VCC)  1/  - - - - - - -    −0.5 V dc to +7.0 V dc     DC input voltage range 2/ - - - - - - - - - -    −0.5 V dc to VCC + 0.5 V dc     DC output voltage range 2/- - - - - - - - - -    −0.5 V dc to VCC + 0.5 V dc     DC input diode current (IIK)  - - - - - - - -    −20 mA     DC output diode current (per pin) (IOK) - - -    −50 mA     DC output source or sink current  - - - - - -    ±100 mA     DC VCC or GND current - - - - - - - - - - - -    ±100 mA     Storage temperature range - - - - - - - - - -    −65°C to +150°C     Maximum power dissipation (PD) 3/ - - - - - -    500 mW     Lead temperature (soldering, 10 seconds)- - -    +300°C     Thermal resistance, junction-to-case (ΘJC)- -    See MIL-M-38510, appendix C     Junction temperature (TJ) - - - - - - - - - -    +175°C


    Supply voltage range (VCC)   - - - - - - - - -    +4.5 V dc to +5.5 V dc     Input low voltage range (VIL)  - - - - - - - -    0.8 V dc     Input high voltage range (VIH) - - - - - - - -    2.0 V dc     Case operating temperature range (TC)- - - - -    −55°C to +125°C


    Fault coverage measurement of manufacturing       logic tests (MIL-STD-883, test method 5012) -   XX percent 4/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90798num
titleMICROCIRCUITS, DIGITAL, FAST, CMOS, DUAL ODD-PARITY GENERATOR/CHECKERS, TTL COMPATIBLE, MONOLITHIC SILICONen
typestandard
page18
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record