SMD-5962-90798
MICROCIRCUITS, DIGITAL, FAST, CMOS, DUAL ODD-PARITY GENERATOR/CHECKERS, TTL COMPATIBLE, MONOLITHIC SILICON
Organization:
DLA - CC - DLA Land and Maritime
Year: 1992
Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example:
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
The device class designator shall be a single letter identifying the product assurance level as follows:
For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
The PIN shall be as shown in the following example:
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
Device type Generic number Circuit function 01 54FCT480 High-speed, dual 8-bit parity generator/checker, TTL compatible inputs 02 54FCT480A High-speed, dual 8-bit parity generator/checker, TTL compatible inputs 03 54FCT480B High-speed, dual 8-bit parity generator/checker, TTL compatible inputs
The device class designator shall be a single letter identifying the product assurance level as follows:
Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535
For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below.
Outline letter Case outline L D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package
The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Supply voltage range (VCC) 1/ - - - - - - - −0.5 V dc to +7.0 V dc DC input voltage range 2/ - - - - - - - - - - −0.5 V dc to VCC + 0.5 V dc DC output voltage range 2/- - - - - - - - - - −0.5 V dc to VCC + 0.5 V dc DC input diode current (IIK) - - - - - - - - −20 mA DC output diode current (per pin) (IOK) - - - −50 mA DC output source or sink current - - - - - - ±100 mA DC VCC or GND current - - - - - - - - - - - - ±100 mA Storage temperature range - - - - - - - - - - −65°C to +150°C Maximum power dissipation (PD) 3/ - - - - - - 500 mW Lead temperature (soldering, 10 seconds)- - - +300°C Thermal resistance, junction-to-case (ΘJC)- - See MIL-M-38510, appendix C Junction temperature (TJ) - - - - - - - - - - +175°C
Supply voltage range (VCC) - - - - - - - - - +4.5 V dc to +5.5 V dc Input low voltage range (VIL) - - - - - - - - 0.8 V dc Input high voltage range (VIH) - - - - - - - - 2.0 V dc Case operating temperature range (TC)- - - - - −55°C to +125°C
Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) - XX percent 4/
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:00:50Z | |
| date available | 2017-09-04T17:00:50Z | |
| date copyright | 04/21/1992 | |
| date issued | 1992 | |
| identifier other | XPQWDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/124308 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 54FCT480 High-speed, dual 8-bit parity generator/checker, TTL compatible inputs 02 54FCT480A High-speed, dual 8-bit parity generator/checker, TTL compatible inputs 03 54FCT480B High-speed, dual 8-bit parity generator/checker, TTL compatible inputs The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535 For device classes M, B, and S, case outline(s) shall meet the requirements in appendix C of MIL-M-38510 and as listed below. For device classes Q and V, case outline(s) shall meet the requirements of MIL-I-38535, appendix C of MIL-M-38510, and as listed below. Outline letter Case outline L D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply voltage range (VCC) 1/ - - - - - - - −0.5 V dc to +7.0 V dc DC input voltage range 2/ - - - - - - - - - - −0.5 V dc to VCC + 0.5 V dc DC output voltage range 2/- - - - - - - - - - −0.5 V dc to VCC + 0.5 V dc DC input diode current (IIK) - - - - - - - - −20 mA DC output diode current (per pin) (IOK) - - - −50 mA DC output source or sink current - - - - - - ±100 mA DC VCC or GND current - - - - - - - - - - - - ±100 mA Storage temperature range - - - - - - - - - - −65°C to +150°C Maximum power dissipation (PD) 3/ - - - - - - 500 mW Lead temperature (soldering, 10 seconds)- - - +300°C Thermal resistance, junction-to-case (ΘJC)- - See MIL-M-38510, appendix C Junction temperature (TJ) - - - - - - - - - - +175°C Supply voltage range (VCC) - - - - - - - - - +4.5 V dc to +5.5 V dc Input low voltage range (VIL) - - - - - - - - 0.8 V dc Input high voltage range (VIH) - - - - - - - - 2.0 V dc Case operating temperature range (TC)- - - - - −55°C to +125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) - XX percent 4/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-90798 | num |
| title | MICROCIRCUITS, DIGITAL, FAST, CMOS, DUAL ODD-PARITY GENERATOR/CHECKERS, TTL COMPATIBLE, MONOLITHIC SILICON | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1992 | |
| contenttype | fulltext |

درباره ما