AASHTO M 169

Standard Specification for Steel Bars, Carbon and Alloy, Cold-Finished

contributor author	AASHTO - American Association of State Highway and Transportation Officials
date accessioned	2017-09-04T17:03:07Z
date available	2017-09-04T17:03:07Z
date copyright	01/01/2009
date issued	2009
identifier other	XWHXMCAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/126717
description abstract	This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, for machining into components, or for use in the as-finished condition as shafting, or in constructional applications, or for other similar purposes (Note 1). Grades of steel are identified by grade numbers or by chemical composition. Note 1—A guide for the selection of steel bars is contained in ASTM A 400. Some end uses may require one or more of the available designations shown under Supplementary Requirements. Supplementary requirements shall apply only when specified individually by the purchaser. The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
language	English
title	AASHTO M 169	num
title	Standard Specification for Steel Bars, Carbon and Alloy, Cold-Finished	en
type	standard
page	11
status	Active
tree	AASHTO - American Association of State Highway and Transportation Officials:;2009
contenttype	fulltext
subject keywords	Alloy steel
subject keywords	carbon steel bars
subject keywords	cold-finished
subject keywords	steel bars