درباره ما
IEEE C63.5
American National Standard for Electromagnetic Compatibility - Radiated Emission Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz)
Year: 2006
Abstract: This standard provides methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz. Antennas included are linearly polarized antennas, such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic dipole arrays, hybrid linearly polarized arrays, broadband horns, etc., that are used in measurements governed by ANSI C63.4-2003.1 The methods include standard site, reference antenna, equivalent capacitance substitution, standard transmitting loop, standard antenna, and standard field methods. The latter three methods are incorporated by reference in 4.5.
Harmonization of this standard with international standards is achieved by providing one-measurement geometry in the 30 MHz to 1000 MHz frequency range. The word “shall” is used in this document to indicate mandatory requirements. The words “should” or “may” are used to indicate that among several possibilities one is strongly recommended but not mandatory.
Harmonization of this standard with international standards is achieved by providing one-measurement geometry in the 30 MHz to 1000 MHz frequency range. The word “shall” is used in this document to indicate mandatory requirements. The words “should” or “may” are used to indicate that among several possibilities one is strongly recommended but not mandatory.
Subject: antenna factors
Show full item record
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T17:03:08Z | |
| date available | 2017-09-04T17:03:08Z | |
| date copyright | 04/21/2006 | |
| date issued | 2006 | |
| identifier other | XWJBJBAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/126740 | |
| description abstract | This standard provides methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz. Antennas included are linearly polarized antennas, such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic dipole arrays, hybrid linearly polarized arrays, broadband horns, etc., that are used in measurements governed by ANSI C63.4-2003.1 The methods include standard site, reference antenna, equivalent capacitance substitution, standard transmitting loop, standard antenna, and standard field methods. The latter three methods are incorporated by reference in 4.5. Harmonization of this standard with international standards is achieved by providing one-measurement geometry in the 30 MHz to 1000 MHz frequency range. The word “shall” is used in this document to indicate mandatory requirements. The words “should” or “may” are used to indicate that among several possibilities one is strongly recommended but not mandatory. | |
| language | English | |
| title | IEEE C63.5 | num |
| title | American National Standard for Electromagnetic Compatibility - Radiated Emission Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz) | en |
| type | standard | |
| page | 73 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2006 | |
| contenttype | fulltext | |
| subject keywords | antenna factors | |
| subject keywords | equivalent capacitance substitution | |
| subject keywords | linearly polarized antennas | |
| subject keywords | near free space | |
| subject keywords | reference antenna | |
| subject keywords | standard antenna | |
| subject keywords | standard site | |
| subject keywords | standard transmitting loop |