درباره ما
Search
CSV
RISIEC 61156-8: Multicore and symmetrical pair/quad cables for digital communications – Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz – Work area wiring – Sectional specification - Edition 1.1; Consolidated Reprint
Abstract: This sectional specification relates to IEC 61156-1 and IEC 61156-7. The cables described herein are specified up to 1 200 MHz and are specifically designed to build patch, equipment, and work area cables as defined in ...
IEC 60384-16: Fixed capacitors for use in electronic equipment – Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Edition 2; Same As IECQ QC 301200
Abstract: This part of IEC 60384 applies to fixed capacitors with metallized electrodes and polypropylene dielectric for use in electronic equipment.
These capacitors may have "self-healing properties" depending on conditions ...
These capacitors may have "self-healing properties" depending on conditions ...
IEC 61010-2-201: English -- Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-201: Particular requirements for control equipment - Edition 1.0
Abstract: Scope and object
This clause of Part 1 is applicable, except as follows.
Equipment included in scope
This part of IEC 61010 specifies safety requirements and related verification ...
This clause of Part 1 is applicable, except as follows.
Equipment included in scope
This part of IEC 61010 specifies safety requirements and related verification ...
IEC 61753-111-8: English -- Fibre optic interconnecting devices and passive components performance standard – Part 111-8: Sealed closures for category G – Ground - Edition 1.0
Abstract: This part of IEC 61753 contains the minimum test and measurement requirements and severities which a sealed fibre optic closure must satisfy in order to be categorised as meeting the IEC standard for category G ...
IEC 61788-13: English -- Superconductivity – Part 13: AC loss measurements – Magnetometer methods for hysteresis loss in superconducting multifilamentary composites - Edition 2.0
Abstract: This part of IEC 61788 describes considerations for the measurement of hysteretic loss in Cu/Nb-Ti multifilamentary composites using DC- or low-ramp-rate magnetometry. This international standard specifies a method of the ...
IEC CISPR 16-1-5: English -- Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Edition 2.0
Abstract: This part of CISPR 16 specifies the requirements for calibration sites in the frequency range 5 MHz to 18 GHz used to perform antenna calibrations according to CISPR 16-1-6. It also specifies the requirements for reference test sites (REFTS) that are used for the validation of compliance test sites (COMTS) in the frequency range 30 MHz to 1 000 MHz...
IEC CISPR 16-4-2: English -- Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modelling – Measurement instrumentation uncertainty - Edition 2.0
Abstract: This part of CISPR 16-4 specifies the method of applying Measurement Instrumentation Uncertainty (MIU) when determining compliance with CISPR disturbance limits. The material is also relevant to any EMC test when interpretation ...
IEC 60654-1: English -- Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions - Second Edition
Abstract: The purpose of this part of IEC 654 is to provide users and suppliers of industrial-process measurement and control systems and parts of such systems with a uniform listing of the selected environmental conditions to which ...